|
|
|
National Stock Number:
5315-00-516-0004
Federal Supply Class:
5315
National Item Identification Number:
005160004
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 5160004 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE | | 5315-516-0004 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5315005160004 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | XX002-1629 | H2229 | RDM TECHNOLOGY B.V. | | 5315-516-0004 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 5315005160004 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE |
|
Techincal Specification:
| UNDER HEAD LENGTH | 3.766 INCHES MINIMUM AND | | 3.797 INCHES MAXIMUM | | DIAMETER | 0.430 INCHES MINIMUM AND | | 0.435 INCHES MAXIMUM | | HEAD STYLE | FLAT | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A400 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE MANGANESE OR | | PHOSPHATE ZINC OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-16232 TY MCL 1 MIL SPEC 1ST TREATMENT RESPONSE OR | | MIL-P-16232 TY Z CL 1 MIL SPEC 2ND TREATMENT RESPONSE OVERALL | | CHAMFER LENGTH | 0.047 INCHES MINIMUM AND | | 0.078 INCHES MAXIMUM | | PIN CHAMFER ANGLE | 44.0 DEGREES MINIMUM AND | | 46.0 DEGREES MAXIMUM | | PIN HEAD DIAMETER | 0.609 INCHES MINIMUM AND | | 0.641 INCHES MAXIMUM | | HEIGHT | 0.172 INCHES MINIMUM AND | | 0.203 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.135 INCHES MINIMUM AND | | 0.145 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.172 INCHES MINIMUM AND | | 0.203 INCHES MAXIMUM |
|
|