|
|
|
|
 | 5315-00-516-0004 | PIN,STRAIGHT,HEADED | 01/01/1963 |
|
 | 5315-00-516-0004 | PIN,STRAIGHT,HEADED | | 0 |
|
 | 5160004 | PIN |  DIXIE AIR PARTS SUPPLY, INC. | 107 |
For additional information Register for Free Trial
|
 For additional information Register for Free Trial
|
 | XX002-1629 | RDM TECHNOLOGY B.V. | H2229 | | 5160004 | ARMY, UNITED STATES DEPARTMENT OF THE | 19204 | | 5315-516-0004 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES | SCY13 | | 5315-516-0004 | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS | A00AM | | 5315005160004 | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS | A00AM | | 5315005160004 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES | SCY13 |
For additional information Register for Free Trial
|
 | HEAD STYLE | FLAT | | CHAMFER LENGTH | 0.047 INCHES MINIMUM AND 0.078 INCHES MAXIMUM | | DIAMETER | 0.430 INCHES MINIMUM AND 0.435 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.135 INCHES MINIMUM AND 0.145 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.172 INCHES MINIMUM AND 0.203 INCHES MAXIMUM | | PIN CHAMFER ANGLE | 44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM | | HEIGHT | 0.172 INCHES MINIMUM AND 0.203 INCHES MAXIMUM | | MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A400 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
For additional information Register for Free Trial
|
 | ACQUISITION METHOD CODE. | | 'All Departments | 1 | SUITABLE FOR COMPETITIVE ACQUISITION. |
| | ACQUISITION METHOD SUFFIX CODE. | | 'All Departments | G | THE GOVERNMENT HAS UNLIMITED RIGHTS TO THE TECHNICAL DATA AND THE DATA PACKAGE IS COMPLETE. VALID AMCS: 1 AND 2. |
| | MAJOR ORGANIZATIONAL ENTITY. | | U.S. Marine Corps. | DM | U.S. Marine Corps. | | Defense Logistics Agency. | DS | Defense Logistics Agency. |
| | PRICE | | All Departments | Price | 10.64 |
| | PRECIOUS METALS INDICATOR CODES. | | All Departments | U | Precious Metal type is unknown. |
| | CRITICALITY CODE. | | All Departments | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| | AUTOMATIC DATA PROCESSING EQUIPMENT. | | | ELECTROSTATIC DISCHARGE CODE. | | | HAZARDOUS MATERIALS INDICATOR CODE. | | All Departments | N | Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials. |
| | DEMILITARIZATION CODE. | | All Departments | A | No-USML/Non-CCLI – No DEMIL or DoD TSC required. Department of Commerce may impose licensing requirements to certain destinations. (Note 9). |
|
For additional information Register for Free Trial |
|  | | | PIN, STRAIGHT, HEADED STEEL, MIL-S-11415C(ORD) 23DEC59 STEEL CLASS C1 19204 ROCK ISLAND ARSENAL THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT DLA DURING *OPEN SOLICITATION ONLY*. TO RECEIVE A COPY OF THE DRAWING(S), FOR EBS SOLICITATIONS USE URL HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/ ASQ H1331 Table 1 Shall be used, and will take precedence over Sample Size Coding methods and Sampling Plan tables as outlined in military and federal specifications, standards, Commercial Item Descriptions (CIDs) prepared by DoD activities, and those sampling plans cited by military service and DLA Troop Support - Quality Assurance Provisions (QAPs). Those documents that identify the classification of characteristics as critical, major, and minor, shall have corresponding associated AQL Index values of 0.10,1.0, and 4.0 respectively. ASQ H1331 takes precedence over non-government standard ASQ Z1.4. Those specifications, standards, CIDs, drawings and QAPs using sampling plans based on zero acceptance are excluded from these requirements, as are those not specifying characteristics as "critical", "major", and/or "minor". ITEM SURFACE MARKING REQUIREMENT: IN ADDITION TO MARKING REQUIREMENTS DEFINED BY TECHNICAL DATA, THE MANUFACTURER'S SYMBOL IS REQUIRED AND SHALL BE APPLIED DIRECTLY TO THE SURFACE OF THIS ITEM. THE MANUFACTURER'S SYMBOL MUST BE LISTED IN MIL-HDBK-57. DO NOT PLACE ANY MARKINGS ON BEARING SURFACES. MANUFACTURER'S SYMBOL IS NOT REQUIRED ON FASTENERS WITH A THREAD DIAMETER OF 0.190 INCHES AND SMALLER. FOR MANUFACTURER'S SYMBOL REGISTRATION INFORMATION AND INQUIRIES PLEASE VISIT THE MIL-HDBK-57 URL AT: http://www.troopsupport.dla.mil/ce/prod_services/logore g.asp | | Cage# H2229 and PartNumber# XX002-1629 |
|
| | | 5160004 | DWG | BASIC | DD | 01/03/1983 | 09/21/2006 | 19200 |
|
|
|
|
|
|
|
|