9540-00-555-2849, BEAM,STRUCTURAL

National Stock Number:
9540-00-555-2849

Federal Supply Class:
9540

National Item Identification Number:
005552849

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.

Manufacturer Information:

10270A	01484	REYNOLDS METALS CO
AMS-QQ-A-200/2	0U583	SAE INTERNATIONAL
AMS-QQ-A-200/2	81343	SOCIETY OF AUTOMOTIVE ENGINEERS INC
LS4523	98897	LOCKHEED MARTIN CORP
QQ-A-200/2	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC

Techincal Specification:

BASIC SHAPE STYLE	Z SHAPE
BOTTOM FLANGE WIDTH	1.060 INCHES NOMINAL
FABRICATION METHOD	EXTRUDED
FILLET RADIUS WHERE BOTTOM RIGHT FLANGE JOINS WEB FLANGE/LEG	0.094 INCHES NOMINAL
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG	0.062 INCHES NOMINAL
FIRST TIP INNER RADIUS	0.031 INCHES NOMINAL
FIRST TIP OUTER RADIUS	0.031 INCHES NOMINAL
FIRST TIP STYLE	SQUARE W/ INNER AND OUTER CORNER RADII
HEAT TREATMENT	T-6 SOLUTION HEAT TREATED
LEFT SIDE TOP FLANGE THICKNESS	0.125 INCHES NOMINAL
LEFT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
LENGTH	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM
OUTER RADIUS WHERE BOTTOM RIGHT FLANGE JOINS WEB FLANGE	0.031 INCHES NOMINAL
OUTER RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE	0.031 INCHES NOMINAL
OVERALL HEIGHT	1.625 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	AMS-QQ-A-200/2 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY 2014
NONDEFINITIVE SPEC/STD DATA	T6 TEMPER
RIGHT BOTTOM INSIDE ANGLE	90.0 DEGREES NOMINAL
RIGHT SIDE BOTTOM FLANGE THICKNESS	0.156 INCHES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIP	IDENTICAL
WEB FLANGE THICKNESS	0.156 INCHES NOMINAL
WEIGHT PER UNIT MEASURE	0.570 POUNDS PER LINEAR FOOT
TOP FLANGE WIDTH	0.780 INCHES NOMINAL

Click here to Register for Free 30-day Trial