|
|
|
National Stock Number:
9540-00-503-6647
Federal Supply Class:
9540
National Item Identification Number:
005036647
Description:
BEAM,STRUCTURAL
Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.
|
Manufacturer Information:
| 1MA160D03-10199 | 76301 | THE BOEING COMPANY | | AMS 4154 | 0U583 | SAE INTERNATIONAL | | PA28236 | 06012 | TRANSTAR METALS CORP | | AMS 4154 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | AMS-QQ-A-200/11 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | QQ-A-200/11 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC |
|
Techincal Specification:
| BASIC SHAPE STYLE | T SHAPE | | FABRICATION METHOD | EXTRUDED | | FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG | 0.090 INCHES NOMINAL | | FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.090 INCHES NOMINAL | | FIRST TIP STYLE | SQUARE END | | HEAT TREATMENT | T-6511 SOLUTION HEAT TREATED | | LEFT SIDE TOP FLANGE THICKNESS | 0.040 INCHES NOMINAL | | LEFT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL | | LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 1.220 INCHES NOMINAL | | LEG THICKNESS | 0.040 INCHES NOMINAL | | LENGTH | 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM | | OVERALL HEIGHT | 1.200 INCHES NOMINAL | | MATERIAL | ALUMINUM ALLOY 7075 | | NONDEFINITIVE SPEC/STD DATA | T6511 TEMPER | | RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 1.330 INCHES NOMINAL | | RIGHT SIDE TOP FLANGE THICKNESS | 0.040 INCHES NOMINAL | | RIGHT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL | | SECOND TIP RELATIONSHIP TO FIRST TIP | IDENTICAL | | WEIGHT PER UNIT MEASURE | 0.178 POUNDS PER LINEAR FOOT | | THIRD TIP RELATIONSHIP TO PRECEDING TIPS | IDENTICAL W/FIRST TIP | | TOP FLANGE WIDTH | 2.550 INCHES NOMINAL |
|
|