5935-00-500-5253 CONNECTOR,PLUG,ELECTRICAL Index 5935-00-500-5258 CONNECTOR,RECEPTACLE,ELECTRICAL

National Stock Number:
9540-00-500-5256

Federal Supply Class:
9540

National Item Identification Number:
005005256

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.


Manufacturer Information:
1MA160D03-1021376301THE BOEING COMPANY
60-537129321TRANSTAR METALS CORP
AMS 41540U583SAE INTERNATIONAL
AMS-QQ-A-200/110U583SAE INTERNATIONAL
AMS-QQ-A-200/1181343SOCIETY OF AUTOMOTIVE ENGINEERS INC
AMS 415481343SOCIETY OF AUTOMOTIVE ENGINEERS INC
PA2729506012TRANSTAR METALS CORP
QQ-A-200/1181348FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC


Techincal Specification:
BASIC SHAPE STYLET SHAPE
FABRICATION METHODEXTRUDED
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG0.094 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG0.094 INCHES NOMINAL
FIRST TIP STYLESQUARE END
HEAT TREATMENTT-6511 SOLUTION HEAT TREATED
LEFT SIDE TOP FLANGE THICKNESS0.050 INCHES NOMINAL
LEFT TOP INSIDE ANGLE90.0 DEGREES NOMINAL
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES1.275 INCHES NOMINAL
LEG THICKNESS0.050 INCHES NOMINAL
LENGTH10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM
OVERALL HEIGHT1.800 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONALLOY 7075 ASSN STD SINGLE MATERIAL RESPONSE
MATERIALALUMINUM ALLOY 7075
NONDEFINITIVE SPEC/STD DATAT6511 TEMPER
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES1.275 INCHES NOMINAL
RIGHT SIDE TOP FLANGE THICKNESS0.050 INCHES NOMINAL
RIGHT TOP INSIDE ANGLE90.0 DEGREES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIPIDENTICAL
WEIGHT PER UNIT MEASURE0.162 POUNDS PER LINEAR FOOT
THIRD TIP RELATIONSHIP TO PRECEDING TIPSIDENTICAL W/FIRST TIP
TOP FLANGE WIDTH2.550 INCHES NOMINAL


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us