9540-00-434-1759, BEAM,STRUCTURAL

National Stock Number:
9540-00-434-1759

Federal Supply Class:
9540

National Item Identification Number:
004341759

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.

Manufacturer Information:

16334	27610	INTERNATIONAL LIGHT METALS CORP SUB OF MARTIN MARIETTA CORP
AMS-QQA200-11	0U583	SAE INTERNATIONAL
PA17308	06012	TRANSTAR METALS CORP
AMS-QQA200-11	81343	SOCIETY OF AUTOMOTIVE ENGINEERS INC
QQA200-11	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
LS3959	98897	LOCKHEED MARTIN CORP

Techincal Specification:

BASIC SHAPE STYLE	T SHAPE
FABRICATION METHOD	EXTRUDED
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG	0.094 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG	0.094 INCHES NOMINAL
FIRST TIP INNER RADIUS	0.032 INCHES NOMINAL
FIRST TIP OUTER RADIUS	0.032 INCHES NOMINAL
FIRST TIP STYLE	SQUARE W/ INNER AND OUTER CORNER RADII
HEAT TREATMENT	T-6 SOLUTION HEAT TREATED
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	0.845 INCHES NOMINAL
LEFT SIDE TOP FLANGE THICKNESS	0.090 INCHES NOMINAL
LEFT TOP INSIDE ANGLE	86.1833 DEGREES NOMINAL
LEG THICKNESS	0.090 INCHES NOMINAL
LENGTH	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-200/11 FED SPEC 1ST MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY 7075
NONDEFINITIVE SPEC/STD DATA	T6 TEMPER
OVERALL HEIGHT	2.500 INCHES NOMINAL
RIGHT TOP INSIDE ANGLE	93.8167 DEGREES NOMINAL
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	0.845 INCHES NOMINAL
RIGHT SIDE TOP FLANGE THICKNESS	0.090 INCHES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIP	IDENTICAL
THIRD TIP RELATIONSHIP TO PRECEDING TIPS	IDENTICAL W/FIRST TIP
TOP FLANGE WIDTH	1.690 INCHES NOMINAL
WEIGHT PER UNIT MEASURE	0.446 POUNDS PER LINEAR FOOT

Click here to Register for Free 30-day Trial