| DUTY CYCLE | CONTINUOUS |
| ENCLOSURE FEATURE | SPRAY TIGHT |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| COOLING METHOD | AMBIENT AIR |
| CURRENT RATING IN AMPS | 3.500 SINGLE INPUT |
| CURRENT RATING METHOD | LOAD |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION |
| INCLOSURE SPECIFICATION | MIL-STD-108 |
| LENGTH OF SHAFT FROM HOUSING | 6.093 INCHES SINGLE END |
| OVERALL HEIGHT | 6.500 INCHES |
| OVERALL LENGTH | 17.593 INCHES |
| OVERALL WIDTH | 6.656 INCHES |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| MOUNTING METHOD | FIXED BASE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 3.000 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 4.875 INCHES |
| NOMINAL THREAD SIZE | 0.500 INCHES SINGLE END |
| POWER RATING | 0.2500 HORSEPOWER OUTPUT |
| ROTOR SPEED RATING IN RPM | 1725.0 SINGLE FULL LOAD |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 3.500 INCHES SINGLE END |
| SHAFT END CHARACTERISTIC | A2 FIRST STYLE AND A9 SECOND STYLE AND A11 THIRD STYLE SINGLE END |
| SHAFT DIAMETER | 0.562 INCHES MINIMUM AND 0.875 INCHES MAXIMUM SINGLE END |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE SINGLE END |
| SPECIAL FEATURES | LH THREAD ON ARMATURE SHAFT |
| STEP DIAMETER | 0.562 INCHES MINIMUM AND 0.750 INCHES MAXIMUM SINGLE END |
| WINDING TYPE | COMPOUND WOUND |
| TEMP RATING | 50.0 AMBIENT CELSIUS AND 50.0 OPERATING CELSIUS |
| TEST DATA DOCUMENT | 81349-MIL-M-17556 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD LENGTH | 0.5625 INCHES NOMINAL SINGLE END |
| THREAD SERIES DESIGNATOR | UNF SINGLE END |