| DUTY CYCLE | INTERMITTENT |
| ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 24.0 LINE TO NEUTRAL SINGLE INPUT |
| COOLING METHOD | AMBIENT AIR |
| CURRENT RATING IN AMPS | 202.000 LOW INPUT |
| CURRENT RATING METHOD | LOAD |
| FEATURES PROVIDED | ELECTRIC NOISE SUPPRESSOR AND HORIZONTAL MOUNTING POSITION |
| INCLOSURE SPECIFICATION | MIL-STD-108 |
| KEYWAY CENTER TO SHAFT END DISTANCE | 0.4690 INCHES NOMINAL SINGLE END |
| LENGTH OF SHAFT FROM HOUSING | 1.020 INCHES FIRST END |
| OVERALL HEIGHT | 8.500 INCHES |
| OVERALL LENGTH | 13.332 INCHES |
| OVERALL WIDTH | 10.500 INCHES |
| MOUNTING FACILITY CIRCLE DIAMETER | 8.125 INCHES |
| MOUNTING FACILITY TYPE AND QUANTITY | 8 UNTHREADED HOLE |
| MOUNTING METHOD | FLANGE |
| POWER RATING | 5.000 HORSEPOWER OUTPUT |
| ROTOR SPEED RATING IN RPM | 5000.0 SINGLE NO LOAD |
| SHAFT END CHARACTERISTIC | A28 FIRST STYLE AND A11 SECOND STYLE AND A12 THIRD STYLE SINGLE END |
| SHAFT DIAMETER | 1.0000 INCHES NOMINAL SINGLE END |
| SHAFT ROTATION DIRECTION | CLOCKWISE SINGLE END |
| SPECIFIC USE | DRIVE UNIT,TURRET ROTATION |
| STEP LENGTH | 0.8750 INCHES NOMINAL SINGLE END |
| WINDING TYPE | COMPOUND WOUND |
| WOODRUFF KEY SIZE DESIGNATION | 6 SINGLE END |
| TERMINAL TYPE AND QUANTITY | 1 CONNECTOR, PLUG |
| TEST DATA DOCUMENT | 19207-8724474 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| TIME INTERVAL | 15.0 MINUTES MAXIMUM ON |
| UNDERCUT CENTER TO SHAFT END DISTANCE | 0.1050 INCHES NOMINAL SINGLE END |