| ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 24.0 LINE TO NEUTRAL SINGLE INPUT |
| COOLING METHOD | AMBIENT AIR |
| CONTROL FIELD CURRENT RATING IN AMPS | 0.360 |
| CONTROL FIELD IMPEDANCE RATING IN OHMS | 32.0 |
| CONTROL FIELD VOLTAGE TYPE AND RATING IN VOLTS | 24.0 AC |
| CONTROL FIELD WINDING TYPE | SINGLE WINDING W/CENTER TAP |
| CURRENT RATING METHOD | NO LOAD |
| CURRENT RATING IN AMPS | 0.360 SINGLE INPUT |
| CURRENT TYPE | AC INPUT |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| LENGTH OF SHAFT FROM HOUSING | 0.500 INCHES IDENTICAL ENDS |
| OVERALL LENGTH | 2.160 INCHES |
| OVERALL WIDTH | 1.437 INCHES |
| MOUNTING FACILITY TYPE AND QUANTITY | 1 CLAMP COLLAR |
| MOUNTING METHOD | CLAMP RING |
| PHASE | SINGLE INPUT |
| ROTOR SPEED RATING IN RPM | 3510.0 SINGLE NO LOAD |
| SHAFT END CHARACTERISTIC | A1 SINGLE STYLE IDENTICAL ENDS |
| SHAFT DIAMETER | 0.1247 INCHES NOMINAL SINGLE END |
| TEMP RATING | 50.0 AMBIENT CELSIUS |
| TERMINAL TYPE AND QUANTITY | 5 SCREW |
| TEST DATA DOCUMENT | 10001-1041712 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| TORQUE RATING AND TYPE | 1.3 INCH-OUNCES STALLED |