| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| CONTROL FIELD VOLTAGE TYPE AND RATING IN VOLTS | 115.0 AC |
| CONTROL FIELD WINDING TYPE | TWO WINDINGS, PARALLEL CONNECTED |
| CONTROL FIELD CURRENT RATING IN AMPS | 0.110 |
| CONTROL FIELD IMPEDANCE RATING IN OHMS | 1045.0 |
| COOLING METHOD | AMBIENT AIR |
| CURRENT RATING METHOD | NO LOAD |
| CURRENT RATING IN AMPS | 0.110 SINGLE INPUT |
| CURRENT TYPE | AC INPUT |
| FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| FULL TOOTH LENGTH | 0.2000 INCHES NOMINAL SINGLE END |
| LENGTH OF SHAFT FROM HOUSING | 0.500 INCHES SINGLE END |
| III OVERALL LENGTH | 2.555 INCHES |
| INCLOSURE SPECIFICATION | MIL-STD-108 |
| INCLOSURE FEATURE | TOTALLY INCLOSED |
| PHASE | SINGLE INPUT |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING FACILITY TYPE AND QUANTITY | 1 CLAMP COLLAR |
| MOUNTING METHOD | CLAMP RING |
| OVERALL HEIGHT | 1.750 INCHES |
| OVERALL WIDTH | 1.750 INCHES |
| ROTOR SPEED RATING IN RPM | 3200.0 SINGLE NO LOAD |
| SHAFT END CHARACTERISTIC | A17 SINGLE STYLE SINGLE END |
| SHAFT DIAMETER | 0.187 INCHES NOMINAL SINGLE END |
| TEETH QUANTITY | 20 SINGLE END |
| TEMP RATING | 55.0 AMBIENT DEG CELSIUS AND 70.0 AMBIENT DEG CELSIUS |
| TERMINAL TYPE AND QUANTITY | 6 SCREW |
| TEST DATA DOCUMENT | 10001-1041712 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| TORQUE RATING AND TYPE | 2.3 INCH-OUNCES STALLED |