| LENGTH OF SHAFT FROM HOUSING | 1.875 INCHES SINGLE END |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| ROTOR SPEED RATING IN RPM | 78.0 SINGLE FULL LOAD |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 8.250 INCHES SINGLE END |
| SHAFT END CHARACTERISTIC | A2 FIRST STYLE SINGLE END AND A9 SECOND STYLE SINGLE END |
| SHAFT DIAMETER | 0.625 INCHES MINIMUM SINGLE END AND 1.000 INCHES MAXIMUM SINGLE END |
| SHAFT ROTATION DIRECTION | CLOCKWISE SINGLE END OR COUNTERCLOCKWISE SINGLE END |
| POWER RATING | 10.0000 HORSEPOWER OUTPUT |
| SPECIAL FEATURES | TWO ADDITIONAL MTG HOLES LOCATED 11.375 IN. FWD OF CENTERLINEOF MOTOR AT DRIVE END ON 5.250 IN. CENTERS |
| WINDING TYPE | COMPOUND WOUND |
| TEMP RATING | 40.0 AMBIENT DEG CELSIUS AND 50.0 OPERATING DEG CELSIUS |
| TERMINAL TYPE AND QUANTITY | 6 SOLDER LUG |
| THREAD LENGTH | 0.8125 INCHES NOMINAL SINGLE END |
| THREAD QUANTITY PER INCH | 18 SINGLE END |
| THREAD SERIES DESIGNATOR | UNF SINGLE END |
| DUTY CYCLE | CONTINUOUS |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| COOLING METHOD | SELF-VENTILATED |
| CURRENT RATING IN AMPS | 78.000 SINGLE INPUT |
| CURRENT RATING METHOD | LOAD |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION |
| INCLOSURE FEATURE | DRIPPROOF-15 DEG |
| INCLOSURE SPECIFICATION | MIL-STD-108 |
| MOUNTING METHOD | FIXED BASE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 11.250 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 13.125 INCHES |
| NOMINAL THREAD SIZE | 0.625 INCHES SINGLE END |
| OVERALL HEIGHT | 21.000 INCHES |
| OVERALL LENGTH | 29.313 INCHES |
| OVERALL WIDTH | 18.625 INCHES |