| ENCLOSURE FEATURE | OPEN PROTECTED |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| CONTROL FIELD IMPEDANCE RATING IN OHMS | 495.0 |
| CONTROL FIELD VOLTAGE TYPE AND RATING IN VOLTS | 57.5 AC AND 115.0 AC |
| CONTROL FIELD WINDING TYPE | SINGLE WINDING W/CENTER TAP |
| COOLING METHOD | AMBIENT AIR |
| CURRENT TYPE | AC INPUT |
| FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| FREQUENCY IN HERTZ | 400.0 INPUT |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| LENGTH OF SHAFT FROM HOUSING | 0.120 INCHES FIRST END |
| LENGTH OF SHAFT FROM HOUSING | 0.210 INCHES SECOND END |
| OVERALL HEIGHT | 1.750 INCHES |
| OVERALL LENGTH | 2.350 INCHES |
| OVERALL WIDTH | 1.750 INCHES |
| MAXIMUM OPERATING ALTITUDE RATING | 50000.0 FEET |
| MOUNTING FACILITY CIRCLE DIAMETER | 1.250 INCHES |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| MOUNTING METHOD | FLANGE |
| PHASE | SINGLE INPUT |
| ROTOR SPEED RATING IN RPM | 9500.0 SINGLE NO LOAD |
| SHAFT DIAMETER | 0.176 INCHES MINIMUM AND 0.177 INCHES MAXIMUM IDENTICAL ENDS |
| SHAFT END CHARACTERISTIC | A14 SINGLE STYLE IDENTICAL ENDS |
| SPLINE LENGTH | 0.120 INCHES NOMINAL FIRST END |
| SPLINE LENGTH | 0.210 INCHES NOMINAL SECOND END |
| SPLINE MINOR DIAMETER | 0.108 INCHES NOMINAL IDENTICAL ENDS |
| SPLINE QUANTITY | 13 IDENTICAL ENDS |
| TEMP RATING | -65.0 OPERATING CELSIUS AND 105.0 OPERATING CELSIUS |
| TORQUE RATING AND TYPE | 2.7 INCH-OUNCES STALLED |