| DUTY CYCLE | CONTINUOUS |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| COOLING METHOD | NONVENTILATED |
| FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| FLAT CENTER TO SHAFT END DISTANCE | 0.4400 INCHES NOMINAL SINGLE END |
| FLAT DEPTH | 0.0200 INCHES NOMINAL SINGLE END |
| FLATTED PORTION LENGTH | 0.3100 INCHES NOMINAL SINGLE END |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| INCLOSURE FEATURE | TOTALLY INCLOSED |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 0.813 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.375 INCHES |
| OVERALL HEIGHT | 3.438 INCHES |
| OVERALL LENGTH | 6.312 INCHES |
| OVERALL WIDTH | 3.375 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 2.000 INCHES SINGLE END |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| MOUNTING METHOD | FIXED BASE |
| ROTOR SPEED RATING IN RPM | 600.0 SINGLE FULL LOAD |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 1.750 INCHES SINGLE END |
| SHAFT DIAMETER | 0.3125 INCHES NOMINAL SINGLE END |
| SHAFT END CHARACTERISTIC | A6 SINGLE STYLE SINGLE END |
| SHAFT ROTATION DIRECTION | CLOCKWISE SINGLE END |
| PHASE | SINGLE INPUT |
| SPECIAL FEATURES | ADDITIONAL FLAT LOCATED ON SAME SIDE OF SHAFT 0.720 IN. APART,FLAT PORTION LG 0.690 IN. |
| TORQUE RATING AND TYPE | 8.0 INCH-OUNCES RUNNING |
| WINDING TYPE | SYNCHRONOUS |
| TERMINAL TYPE AND QUANTITY | 4 WIRE LEAD |