| CONDUCTOR QUANTITY | 24 |
| ACCESSORY WIRE TYPE AND QUANTITY | 3 REINFORCEMENT |
| CONDUCTOR FORM | STRANDED ALL CONDUCTORS |
| MATERIAL | COPPER CORE CONDUCTOR ALL CONDUCTORS |
| PLASTIC POLYVINYL CHLORIDE 1ST POSITION PRIMARY INSULATION ALL CONDUCTORS |
| COTTON 1ST POSITION BRAID, NON-METALLIC CABLE |
| COPPER 2ND POSITION SHIELD BRAID, METALLIC CABLE |
| TIN 3RD POSITION COATING CABLE |
| RUBBER NATURAL OR |
| RUBBER SYNTHETIC 4TH POSITION JACKET CABLE |
| SURFACE TREATMENT | TIN CORE CONDUCTOR ALL CONDUCTORS |
| ROUND CONDUCTOR SIZE | 18 AWG ALL CONDUCTORS |
| STRAND QUANTITY PER CONDUCTOR | 16 ALL CONDUCTORS |
| STRAND AWG SIZE PER CONDUCTOR | 30 ALL CONDUCTORS |
| CONDUCTOR SEQUENCE WITHIN GROUPS | FIRST CONDUCTOR AND |
| THIRD CONDUCTOR AND |
| FIFTH CONDUCTOR AND |
| SEVENTH CONDUCTOR AND |
| TENTH CONDUCTOR FIRST GROUP |
| FIRST CONDUCTOR AND |
| SECOND CONDUCTOR AND |
| FOURTH CONDUCTOR AND |
| SIXTH CONDUCTOR AND |
| EIGHTH CONDUCTOR AND |
| NINTH CONDUCTOR AND |
| TENTH CONDUCTOR SECOND GROUP |
| COLOR CODING DOCUMENT | 8519365-18876 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| VOLTAGE RATING | 600.0 AC MAXIMUM RATED WORKING VOLTAGE ALL CONDUCTORS |
| STYLE DESIGNATOR | JACK AND INTERNAL ANGLE CONNECTOR |
| OVERALL LENGTH | 160.000 FEET |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| CROSS SECTION OUTSIDE DIAMETER | 1.215 INCHES NOMINAL |
| TERMINATION TYPE | CONNECTOR PLUG BOTH ENDS ALL CONDUCTORS |
| TERMINAL MANUFACTURER IDENTIFYING REFERENCE NUMBER | MS3108A28-16P 1ST END ALL CONDUCTORS |
| MS3108A28-16S 2ND END ALL CONDUCTORS |
| TERMINAL COMMERCIAL AND GOVERNMENT ENTITY CODE | 96906 1ST END ALL CONDUCTORS |
| 96906 2ND END ALL CONDUCTORS |
| FSC APPLICATION DATA | ANTENNA-RECEIVER-TRANSMITTER GROUP,ACQUISITION |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 18876 |
| DESIGN CONTROL REFERENCE | 9984646 |