| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| TERMINAL TYPE AND QUANTITY | 6 WIRE LEAD |
| BODY STYLE | STANDARD ROUND C |
| BODY SIZE | 11 |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| ROTOR INPUT CURRENT RATING | 110.0 MILLIAMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 600.0 MILLIWATTS NOMINAL |
| ZRO IMPEDANCE MAGNITUDE IN OHMS | 240.00 NOMINAL |
| ZRO IMPEDANCE ANGLE IN DEG | 78.00 NOMINAL |
| ZSO IMPEDANCE MAGNITUDE IN OHMS | 4.80 NOMINAL |
| ZSO IMPEDANCE ANGLE IN DEG | 60.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 36.00 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 1.13 NOMINAL |
| TRANSFORMATION RATIO | 0.123 ROTOR TO STATOR NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 6.000 INPUT TO OUTPUT MINIMUM AND |
| 8.000 INPUT TO OUTPUT MAXIMUM |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 15.00 |
| INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -30.0 TO 30.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 6.0 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.0 CENTIMETER-GRAMS NOMINAL |
| SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND |
| 1.0000 INCHES MAXIMUM |
| PILOT DIAMETER | 0.5000 INCHES NOMINAL |
| OVERALL LENGTH | 2.0930 INCHES NOMINAL |
| FLANGE DIAMETER | 1.0620 INCHES NOMINAL |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| UNDERCUT DIAMETER | 0.9620 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.7180 INCHES MAXIMUM |
| SHAFT TYPE | ROUND, UNDERCUT SINGLE SHAFT |
| SHAFT DIAMETER | 0.1200 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.3750 INCHES NOMINAL SINGLE SHAFT |
| TERMINAL LOCATION | REAR |
| BODY MATERIAL | STEEL, STAINLESS |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 89944 |
| DESIGN CONTROL REFERENCE | B2542000410-0 |