| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 5.00 INCH-OUNCES NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 1.00 INCH-OUNCES NOMINAL |
| BODY DIAMETER | 1.9060 INCHES NOMINAL |
| BODY MATERIAL | STEEL, CORROSION RESISTING |
| BODY SIZE | 23 |
| BODY STYLE | STANDARD ROUND, ROTATABLE HOUSING |
| FLANGE DIAMETER | 2.2495 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.2470 INCHES MINIMUM AND 0.2530 INCHES MAXIMUM |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OVERALL LENGTH | 4.9010 INCHES MAXIMUM |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 30.00 INPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 70.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 3.4630 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 0.800 INPUT TO OUTPUT MINIMUM AND 1.600 INPUT TO OUTPUT MAXIMUM |
| PLUS J ZRO REACTANCE IN OHMS | 520.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 53.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 123.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 120.00 NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 20.0 MAXIMUM |
| SCHEMATIC DIAGRAM DESIGNATOR | 2 ROTOR, 2 STATOR |
| SHAFT DIAMETER | 0.2470 INCHES NOMINAL SINGLE SHAFT |
| SHAFT NOMINAL THREAD SIZE | 0.190 INCHES SINGLE SHAFT |
| SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| SHAFT THREAD LENGTH | 0.3250 INCHES NOMINAL SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| SHAFT LENGTH | 0.7190 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| SHOULDER DIAMETER | 1.9900 INCHES MINIMUM AND 1.9930 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.4100 INCHES NOMINAL |
| SPLINE TOOTH DIAMETRAL PITCH | 48 SINGLE SHAFT |
| SPLINE TOOTH QUANTITY | 106 SINGLE SHAFT |
| STATOR DC RESISTANCE IN OHMS | 130.00 NOMINAL |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 20.0 MAXIMUM |
| ZRO RESISTANCE IN OHMS | 110.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 123.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 22.00 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 8 SCREW |
| TEST DATA DOCUMENT | 03538-7753719+1 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| TRANSFORMATION RATIO | 1.000 ROTOR TO STATOR NOMINAL |