5990-00-538-1124, RESOLVER,ELECTRICAL

National Stock Number:
5990-00-538-1124

Federal Supply Class:
5990

National Item Identification Number:
005381124

Description:
RESOLVER,ELECTRICAL

Detail:
An item consisting of a rotor and a stator inductively coupled. It usually has two rotor windings displaced from each other by 90 degrees and two stator windings similarly displaced. The output voltage(s) is a trigonometric function of the input voltage(s) and the angular displacement of the rotor with respect to the stator. See also SYNCHRO (as modified) and GONIOMETER, ELECTRICAL. Excludes TRANSOLVER, ELECTRICAL and potentiometer sine/cosine electrical resolvers.

Manufacturer Information:

105D2A2	95542	NORTHROP GRUMMAN SYSTEMS CORPORATION
1289320	10001	NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
R151M0D102	09017	EDO
1876577PC3	10001	NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER

Techincal Specification:

FREQUENCY IN HERTZ	400.0 NOMINAL
TERMINAL TYPE AND QUANTITY	12 SCREW
BODY STYLE	STANDARD ROUND B
BODY SIZE	15
STATOR INPUT VOLTAGE RATING IN VOLTS	0.0 MINIMUM AND
	60.0 MAXIMUM
ZRO RESISTANCE IN OHMS	370.00 NOMINAL
PLUS J ZRO REACTANCE IN OHMS	2770.00 NOMINAL
ZSO RESISTANCE IN OHMS	463.00 NOMINAL
PLUS J ZSO REACTANCE IN OHMS	2770.00 NOMINAL
ROTOR DC RESISTANCE IN OHMS	240.00 MAXIMUM
STATOR DC RESISTANCE IN OHMS	354.00 MAXIMUM
TRANSFORMATION RATIO	0.960 ROTOR TO STATOR MINIMUM AND
	1.000 ROTOR TO STATOR MAXIMUM
PHASE SHIFT ANGLE IN DEG	4.000 INPUT TO OUTPUT MINIMUM AND
	8.000 INPUT TO OUTPUT MAXIMUM
MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT	20.00 OUTPUT
SHOULDER DIAMETER	1.3115 INCHES MINIMUM AND
	1.3120 INCHES MAXIMUM
PILOT DIAMETER	0.8745 INCHES MINIMUM AND
	0.8750 INCHES MAXIMUM
OVERALL LENGTH	2.5590 INCHES MAXIMUM
FLANGE DIAMETER	1.4360 INCHES MINIMUM AND
	1.4370 INCHES MAXIMUM
FLANGE THICKNESS	0.0900 INCHES MINIMUM AND
	0.0960 INCHES MAXIMUM
UNDERCUT WIDTH	0.0780 INCHES NOMINAL
PILOT LENGTH	0.0370 INCHES MINIMUM AND
	0.0430 INCHES MAXIMUM
SHOULDER LENGTH	0.1290 INCHES MINIMUM AND
	0.1350 INCHES MAXIMUM
MOUNTING SURFACE TO TERMINAL END DISTANCE	1.7630 INCHES MINIMUM AND
	1.8190 INCHES MAXIMUM
SHAFT TYPE	ROUND SINGLE SHAFT
SHAFT DIAMETER	0.1871 INCHES MINIMUM AND
	0.1873 INCHES MAXIMUM SINGLE SHAFT
SHAFT LENGTH	0.5370 INCHES MINIMUM AND
	0.6050 INCHES MAXIMUM SINGLE SHAFT
TERMINAL LOCATION	REAR
TEST DATA DOCUMENT	10001-1876577 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
SHAFT MAXIMUM RADIAL PLAY	0.0005 INCHES
SHAFT RADIAL PLAY TEST POINT	0.125 INCHES NOMINAL
SHAFT RADIAL PLAY DETERMINING WEIGHT	3.0 OUNCES
SHAFT END PLAY	0.0010 INCHES NOMINAL
SHAFT END PLAY DETERMINING WEIGHT	48.0 OUNCES
SHAFT MAXIMUM RUNOUT	0.0005 INCHES
THE MANUFACTURERS DATA
MANUFACTURERS CODE	10001
DESIGN CONTROL REFERENCE	1876577PC3

Click here to Register for Free 30-day Trial