| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -15.0 TO 15.0 |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| BODY SIZE | 11 |
| BODY STYLE | STANDARD ROUND C |
| FLANGE DIAMETER | 1.0570 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OVERALL LENGTH | 2.1600 INCHES MINIMUM AND 2.1840 INCHES MAXIMUM |
| MAXIMUM TEMP RISE | 15.0 CELSIUS |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.7960 INCHES MAXIMUM |
| PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 9.00 NOMINAL |
| ROTOR INPUT CURRENT RATING | 280.0 MILLIAMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 910.0 MILLIWATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| SHAFT DIAMETER | 0.1195 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0250 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHAFT LENGTH | 0.3650 INCHES MINIMUM AND 0.3880 INCHES MAXIMUM SINGLE SHAFT |
| SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 3.00 NOMINAL |
| ZRO IMPEDANCE ANGLE IN DEG | 81.70 NOMINAL |
| ZRO IMPEDANCE MAGNITUDE IN OHMS | 107.00 NOMINAL |
| ZSO IMPEDANCE ANGLE IN DEG | 79.50 NOMINAL |
| ZSO IMPEDANCE MAGNITUDE IN OHMS | 18.10 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| TORQUE GRADIENT PER ANGULAR DEG | 5500.0 MILLIMETER-MILLIGRAMS NOMINAL |
| TRANSFORMATION RATIO | 0.454 ROTOR TO STATOR NOMINAL |
| UNDERCUT DIAMETER | 0.9750 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0500 INCHES NOMINAL |