| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| BODY DIAMETER | 1.9900 INCHES MINIMUM AND 1.9930 INCHES MAXIMUM |
| BODY STYLE | STANDARD ROUND, ROTATABLE HOUSING |
| BODY SIZE | 23 |
| COMPENSATOR DC RESISTANCE IN OHMS | 53.00 NOMINAL |
| COMPENSATOR RESONANT FREQUENCY IN HERTZ | 30.0 |
| COMPENSATOR TRANSFORMATION RATIO IN PERCENT | 0.250 ROTOR TO COMPENSATOR NOMINAL |
| FLANGE DIAMETER | 2.2495 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.2500 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -3.0 TO 3.0 |
| LENGTH | 0.4100 INCHES NOMINAL SHOULDER |
| OVERALL LENGTH | 4.6550 INCHES NOMINAL |
| MATERIAL | ALUMINUM BODY |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 3.0100 INCHES NOMINAL |
| OUTPUT VOLTAGE FUNCTIONAL ERROR RANGE IN PERCENT | -0.5 TO 0.5 |
| PHASE SHIFT ANGLE IN DEG | 1.900 OUTPUT TO INPUT NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 230.00 NOMINAL |
| SHAFT DIAMETER | 0.2407 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.7188 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND SINGLE SHAFT |
| SHOULDER DIAMETER | 1.9900 INCHES MINIMUM AND 1.9930 INCHES MAXIMUM |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 100.0 MAXIMUM |
| STATOR DC RESISTANCE IN OHMS | 205.00 NOMINAL |
| STATOR INPUT CURRENT RATING | 50.0 MILLIAMPERES NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 12 PIN |
| TEST DATA DOCUMENT | 94135-A12Z13010-42 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| TRANSFORMATION RATIO EQUALITY IN PERCENT | 0.1 NOMINAL |
| TRANSFORMATION RATIO | 0.975 ROTOR TO STATOR NOMINAL |