| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| ROTOR INPUT CURRENT RATING | 1.0 AMPERES MAXIMUM |
| ROTOR INPUT ELECTRICAL POWER RATING | 5.0 WATTS MAXIMUM |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| BODY SIZE | 22 |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| ZRO RESISTANCE IN OHMS | 45.00 NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 255.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 0.60 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 0.26 NOMINAL |
| TRANSFORMATION RATIO | 0.450 ROTOR TO STATOR NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 50.000 INPUT TO OUTPUT NOMINAL |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 45.0 CENTIMETER-GRAMS MAXIMUM |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 15.0 CENTIMETER-GRAMS MAXIMUM |
| BODY STYLE | STANDARD ROUND C |
| SHOULDER DIAMETER | 1.9990 INCHES MINIMUM AND |
| 1.9995 INCHES MAXIMUM |
| PILOT DIAMETER | 0.7490 INCHES MINIMUM AND |
| 0.7500 INCHES MAXIMUM |
| OVERALL LENGTH | 2.2030 INCHES NOMINAL |
| FLANGE DIAMETER | 2.1600 INCHES MINIMUM AND |
| 2.1610 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.1250 INCHES NOMINAL |
| UNDERCUT DIAMETER | 2.0000 INCHES MINIMUM |
| UNDERCUT WIDTH | 0.1000 INCHES MINIMUM |
| PILOT LENGTH | 0.0600 INCHES NOMINAL |
| SHOULDER LENGTH | 0.2000 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.6430 INCHES MAXIMUM |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHAFT DIAMETER | 0.1845 INCHES MINIMUM AND |
| 0.1850 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.5600 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0470 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0320 INCHES NOMINAL SINGLE SHAFT |
| TERMINAL LOCATION | REAR |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 18876 |
| DESIGN CONTROL REFERENCE | 10033254 |