| AFT OF FIRST FLANGE DIAMETER | 1.9940 INCHES MINIMUM AND 1.9950 INCHES MAXIMUM |
| BODY DIAMETER | 1.9840 INCHES NOMINAL |
| BODY STYLE | STANDARD ROUND D |
| BODY SIZE | 23 |
| FLANGE DIAMETER | 2.2490 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.2480 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| FREQUENCY IN HERTZ | 60.0 NOMINAL |
| LENGTH | 0.4190 INCHES MINIMUM AND 0.4200 INCHES MAXIMUM SHOULDER |
| OVERALL LENGTH | 4.7430 INCHES MINIMUM AND 4.8550 INCHES MAXIMUM |
| MATERIAL | ALUMINUM BODY |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 0.02 OUTPUT |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 3.6170 INCHES NOMINAL |
| PILOT LENGTH | 0.0430 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 7.164 INPUT TO OUTPUT MINIMUM AND 7.236 INPUT TO OUTPUT MAXIMUM |
| PILOT DIAMETER | 0.5990 INCHES MINIMUM AND 0.6000 INCHES MAXIMUM |
| ROTOR DC RESISTANCE IN OHMS | 260.30 MINIMUM AND 287.70 MAXIMUM |
| SECOND SHOULDER DIAMETER | 1.9985 INCHES MINIMUM AND 1.9995 INCHES MAXIMUM |
| SECOND SHOULDER LENGTH | 0.1700 INCHES MINIMUM AND 0.1720 INCHES MAXIMUM |
| SHAFT DIAMETER | 0.2400 INCHES MINIMUM AND 0.2405 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.6100 INCHES MINIMUM AND 0.6300 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT MAXIMUM RUNOUT | 0.0020 INCHES |
| SHAFT NOMINAL THREAD SIZE | 0.240 INCHES SINGLE SHAFT |
| SHAFT END PLAY DETERMINING WEIGHT | 16.0 OUNCES |
| SHAFT END PLAY | 0.0060 INCHES MAXIMUM |
| SHAFT THREAD CLASS | 3A SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| SHAFT THREAD LENGTH | 0.3100 INCHES MINIMUM AND 0.3400 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| SHAFT TYPE | ROUND, THREADED SINGLE SHAFT |
| SHOULDER DIAMETER | 1.9940 INCHES MINIMUM AND 1.9950 INCHES MAXIMUM |
| STATOR INPUT ELECTRICAL POWER RATING | 200.0 MILLIWATTS NOMINAL |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 8.0 MINIMUM AND 50.0 MAXIMUM |
| STATOR DC RESISTANCE IN OHMS | 72.96 MINIMUM AND 80.43 MAXIMUM |
| STATOR INPUT CURRENT RATING | 40.0 MILLIAMPERES NOMINAL |
| ZSO IMPEDANCE ANGLE IN DEG | 79.00 NOMINAL |
| ZSO IMPEDANCE MAGNITUDE IN OHMS | 570.00 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 8 SCREW |
| TEST DATA DOCUMENT | 10001-1233385 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |