| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -8.0 TO 8.0 |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.50 INCH-OUNCES NOMINAL |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| BODY SIZE | 31 |
| BODY STYLE | STANDARD ROUND B |
| FLANGE DIAMETER | 3.1000 INCHES NOMINAL |
| FLANGE THICKNESS | 0.2500 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OVERALL LENGTH | 5.7300 INCHES NOMINAL |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 35.00 OUTPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 100.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 3.3800 INCHES NOMINAL |
| NONDEFINITIVE SPEC/STD DATA | 31TX4C TYPE |
| PHASE SHIFT ANGLE IN DEG | 2.000 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.6750 INCHES NOMINAL |
| PILOT DIAMETER | 2.7000 INCHES NOMINAL |
| ROTOR INPUT CURRENT RATING | 1.8 AMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 17.0 WATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| SHAFT DIAMETER | 0.2500 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.8000 INCHES NOMINAL SINGLE SHAFT |
| SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| SHAFT THREAD LENGTH | 0.2670 INCHES NOMINAL SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| SHAFT NOMINAL THREAD SIZE | 0.250 INCHES SINGLE SHAFT |
| SHOULDER DIAMETER | 2.7500 INCHES NOMINAL |
| SPLINE TOOTH QUANTITY | 22 SINGLE SHAFT |
| SPLINE TOOTH DIAMETRAL PITCH | 96 SINGLE SHAFT |
| ZRO IMPEDANCE ANGLE IN DEG | 87.00 MAXIMUM |
| ZRO IMPEDANCE MAGNITUDE IN OHMS | 166.00 MAXIMUM |
| ZSS IMPEDANCE ANGLE IN DEG | 72.00 MAXIMUM |
| ZSS IMPEDANCE MAGNITUDE IN OHMS | 5.90 MAXIMUM |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 SCREW |
| TORQUE GRADIENT PER ANGULAR DEG | 0.670 INCH-OUNCES NOMINAL |
| TRANSFORMATION RATIO | 0.783 ROTOR TO STATOR NOMINAL |
| UNDERCUT WIDTH | 0.2500 INCHES NOMINAL |