| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -5.5 TO 5.5 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 40.00 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 20.00 CENTIMETER-GRAMS NOMINAL |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 1.0350 INCHES NOMINAL |
| ALIGNMENT HOLE DEPTH | 0.0125 INCHES NOMINAL |
| ALIGNMENT HOLE QUANTITY | 4 |
| BODY MATERIAL | ALUMINUM |
| BODY SIZE | 11 |
| BODY STYLE | STANDARD ROUND C |
| FLANGE DIAMETER | 1.0570 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0900 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OVERALL LENGTH | 2.1660 INCHES MINIMUM AND 2.1820 INCHES MAXIMUM |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 20.00 OUTPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 25.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.6910 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 5.000 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| ROTOR DC RESISTANCE IN OHMS | 75.00 NOMINAL |
| SHAFT DIAMETER | 0.1870 INCHES MINIMUM AND 0.1873 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.4750 INCHES MINIMUM AND 0.4950 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0310 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0310 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| STATOR DC RESISTANCE IN OHMS | 31.20 NOMINAL |
| STATOR INPUT CURRENT RATING | 35.0 MILLIAMPERES NOMINAL |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 10.2 NOMINAL |
| ZRO IMPEDANCE ANGLE IN DEG | 80.00 NOMINAL |
| ZRO IMPEDANCE MAGNITUDE IN OHMS | 405.00 NOMINAL |
| ZSO IMPEDANCE ANGLE IN DEG | 82.00 NOMINAL |
| ZSO IMPEDANCE MAGNITUDE IN OHMS | 316.00 NOMINAL |
| TERMINAL LOCATION | SIDE |
| TERMINAL TYPE AND QUANTITY | 6 WIRE LEAD |
| TORQUE GRADIENT PER ANGULAR DEG | 214.000 MILLIMETER-MILLIGRAMS NOMINAL |
| TRANSFORMATION RATIO | 1.200 ROTOR TO STATOR NOMINAL |
| UNDERCUT DIAMETER | 0.9700 INCHES MINIMUM AND 0.9750 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |