| BODY SIZE | 11 |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 10.0 NOMINAL |
| STATOR INPUT CURRENT RATING | 100.0 MILLIAMPERES MAXIMUM |
| STATOR INPUT ELECTRICAL POWER RATING | 0.3 WATTS MAXIMUM |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| ZSO RESISTANCE IN OHMS | 40.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 175.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 40.00 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 20.00 NOMINAL |
| TRANSFORMATION RATIO | 1.000 ROTOR TO STATOR NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 5.000 INPUT TO OUTPUT NOMINAL |
| MAXIMUM TEMP RISE | 20.0 DEG CELSIUS |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 20.00 OUTPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 25.00 |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -15.0 TO 15.0 |
| BODY STYLE | STANDARD ROUND C |
| SHOULDER DIAMETER | 1.0000 INCHES NOMINAL |
| PILOT DIAMETER | 0.6250 INCHES NOMINAL |
| OVERALL LENGTH | 2.4400 INCHES MAXIMUM |
| FLANGE DIAMETER | 1.0570 INCHES MINIMUM AND |
| 1.0650 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0900 INCHES MINIMUM AND |
| 0.0960 INCHES MAXIMUM |
| UNDERCUT DIAMETER | 0.9750 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0500 INCHES NOMINAL |
| PILOT LENGTH | 0.0590 INCHES MINIMUM AND |
| 0.0650 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.0580 INCHES MINIMUM AND |
| 0.0810 INCHES MAXIMUM |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.8100 INCHES MAXIMUM |
| SHAFT TYPE | SPLINE SINGLE SHAFT |
| SHAFT DIAMETER | 0.1872 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.2370 INCHES MAXIMUM SINGLE SHAFT |
| SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| SHAFT NOMINAL THREAD SIZE | 0.190 INCHES SINGLE SHAFT |
| SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| TERMINAL TYPE AND QUANTITY | 6 TAB W/SCREW |
| TERMINAL LOCATION | REAR |
| BODY MATERIAL | STEEL, CORROSION RESISTING |
| SHAFT MAXIMUM RADIAL PLAY | 0.0006 INCHES |
| SHAFT RADIAL PLAY TEST POINT | 0.2500 INCHES NOMINAL |
| SHAFT RADIAL PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| SHAFT END PLAY | 0.0005 INCHES MINIMUM AND |
| 0.0015 INCHES MAXIMUM |
| SHAFT END PLAY DETERMINING WEIGHT | 16.0 OUNCES |
| FRAGILITY FACTOR | MODERATELY RUGGED |