| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -14.0 TO 14.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 9.0 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.0 CENTIMETER-GRAMS NOMINAL |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| BODY STYLE | STANDARD ROUND A |
| BODY SIZE | 8 |
| FLANGE DIAMETER | 0.7470 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OVERALL LENGTH | 1.7880 INCHES MINIMUM AND 1.8180 INCHES MAXIMUM |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 75.00 OUTPUT |
| MAXIMUM TEMP RISE | 100.0 CELSIUS |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 75.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2410 INCHES MAXIMUM |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 13.200 INPUT TO OUTPUT MAXIMUM |
| PILOT LENGTH | 0.0430 INCHES NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 3465.00 MINIMUM AND 4245.00 MAXIMUM |
| PLUS J ZRS REACTANCE IN OHMS | 276.00 MINIMUM AND 484.00 MAXIMUM |
| PLUS J ZSO REACTANCE IN OHMS | 28.60 MINIMUM AND 41.40 MAXIMUM |
| ROTOR DC RESISTANCE IN OHMS | 618.00 MINIMUM AND 770.00 MAXIMUM |
| ROTOR INPUT CURRENT RATING | 26.1 MILLIAMPERES MINIMUM AND 31.9 MILLIAMPERES MAXIMUM |
| ROTOR INPUT ELECTRICAL POWER RATING | 0.8 WATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| SHAFT DIAMETER | 0.0895 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.5470 INCHES MINIMUM AND 0.5770 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0250 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| ZRO RESISTANCE IN OHMS | 743.00 MINIMUM AND 1093.00 MAXIMUM |
| ZRS RESISTANCE IN OHMS | 1258.00 MINIMUM AND 1784.00 MAXIMUM |
| ZSO RESISTANCE IN OHMS | 7.62 MINIMUM AND 11.62 MAXIMUM |
| STATOR DC RESISTANCE IN OHMS | 8.80 MINIMUM AND 11.50 MAXIMUM |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| TRANSFORMATION RATIO | 0.0995 ROTOR TO STATOR MINIMUM AND 0.1057 ROTOR TO STATOR MAXIMUM |
| UNDERCUT DIAMETER | 0.6880 INCHES MINIMUM AND 0.6910 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |