| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -2.0 TO 2.0 |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| BODY STYLE | STANDARD ROUND A |
| BODY SIZE | 8 |
| FLANGE DIAMETER | 0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0620 INCHES MINIMUM |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OVERALL LENGTH | 1.7410 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2410 INCHES MAXIMUM |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 11.000 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.0430 INCHES NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 3850.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 420.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 36.00 NOMINAL |
| RECEIVER ERROR ANGULAR RANGE IN MINUTES | -2.0 TO 2.0 |
| ROTOR DC RESISTANCE IN OHMS | 11.80 NOMINAL |
| ROTOR INPUT CURRENT RATING | 29.0 MILLIAMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 800.0 MILLIWATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| SHAFT DIAMETER | 0.0895 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.5000 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0200 INCHES MINIMUM AND 0.0300 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0150 INCHES MINIMUM AND 0.0250 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| ZRO RESISTANCE IN OHMS | 950.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 1550.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 10.00 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| UNDERCUT DIAMETER | 0.6880 INCHES MINIMUM AND 0.6910 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |