| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 16.0 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 4.0 CENTIMETER-GRAMS NOMINAL |
| BODY STYLE | STANDARD ROUND C |
| BODY SIZE | 11 |
| FLANGE DIAMETER | 1.0620 INCHES NOMINAL |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| LENGTH | 0.0620 INCHES NOMINAL SHOULDER |
| OVERALL LENGTH | 2.3720 INCHES MAXIMUM |
| MATERIAL | STEEL CORROSION RESISTING BODY |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 18.00 OUTPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.7030 INCHES MAXIMUM |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 8.000 INPUT TO OUTPUT NOMINAL |
| PILOT DIAMETER | 0.6250 INCHES MAXIMUM |
| ROTOR INPUT CURRENT RATING | 520.0 MILLIAMPERES MAXIMUM |
| ROTOR INPUT ELECTRICAL POWER RATING | 340.0 MILLIWATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| SCHEMATIC DIAGRAM DESIGNATOR | 1 ROTOR, 2 STATOR |
| SHAFT DIAMETER | 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.5310 INCHES NOMINAL SINGLE SHAFT |
| SHAFT MAXIMUM RADIAL PLAY | 0.0005 INCHES |
| SHAFT MAXIMUM RUNOUT | 0.0008 INCHES |
| SHAFT RADIAL PLAY DETERMINING WEIGHT | 4.0 OUNCES |
| SHAFT RADIAL PLAY TEST POINT | 0.125 INCHES MAXIMUM |
| SHAFT SLOT DEPTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0250 INCHES NOMINAL SINGLE SHAFT |
| SHAFT END PLAY DETERMINING WEIGHT | 16.0 OUNCES |
| SHAFT END PLAY | 0.0005 INCHES MINIMUM AND 0.0015 INCHES MAXIMUM |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHOULDER DIAMETER | 1.0000 INCHES MAXIMUM |
| ZRS IMPEDANCE ANGLE IN DEG | 24.70 NOMINAL |
| ZRS IMPEDANCE MAGNITUDE IN OHMS | 159.50 NOMINAL |
| ZSO IMPEDANCE ANGLE IN DEG | 80.30 NOMINAL |
| ZSO IMPEDANCE MAGNITUDE IN OHMS | 150.00 NOMINAL |
| ZRO IMPEDANCE ANGLE IN DEG | 78.10 NOMINAL |
| ZRO IMPEDANCE MAGNITUDE IN OHMS | 550.00 NOMINAL |
| TERMINAL DESIGNATOR AND SCHEMATIC POSITION | CONNECTION R1 POSITION B AND CONNECTION R2 POSITION A AND CONNECTION R3 POSITION C AND CONNECTION S1 POSITION J AND CONNECTION S2 POSITION F AND CONNECTION S3 POSITION H AND CONNECTION S4 POSITION E |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 7 WIRE LEAD |
| TRANSFORMATION RATIO | 484.000 STATOR TO ROTOR NOMINAL |
| UNDERCUT DIAMETER | 0.9750 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0500 INCHES NOMINAL |