| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 15.0 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.0 CENTIMETER-GRAMS NOMINAL |
| BODY SIZE | 8 |
| BODY STYLE | STANDARD ROUND A |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| FLANGE DIAMETER | 0.7500 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| PILOT LENGTH | 0.0400 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 13.000 INPUT TO OUTPUT NOMINAL |
| PILOT DIAMETER | 0.5000 INCHES MAXIMUM |
| MATERIAL | STEEL CORROSION RESISTING BODY |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.3720 INCHES MAXIMUM |
| OVERALL LENGTH | 2.0480 INCHES MAXIMUM |
| PLUS J ZRO REACTANCE IN OHMS | 510.00 NOMINAL |
| PLUS J ZSS REACTANCE IN OHMS | 80.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 109.00 NOMINAL |
| SCHEMATIC DIAGRAM DESIGNATOR | 1 ROTOR, 2 STATOR |
| SHAFT LENGTH | 0.4310 INCHES NOMINAL SINGLE SHAFT |
| SHAFT DIAMETER | 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT END PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| SHAFT END PLAY | 0.0003 INCHES NOMINAL |
| SHAFT MAXIMUM RUNOUT | 0.0010 INCHES |
| SHAFT MAXIMUM RADIAL PLAY | 0.0008 INCHES |
| SHAFT RADIAL PLAY TEST POINT | 0.250 INCHES NOMINAL |
| SHAFT SLOT DEPTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0250 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| STATOR DC RESISTANCE IN OHMS | 145.00 NOMINAL |
| STATOR INPUT CURRENT RATING | 50.0 MILLIAMPERES NOMINAL |
| STATOR INPUT ELECTRICAL POWER RATING | 350.0 MILLIWATTS NOMINAL |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| TERMINAL DESIGNATOR AND SCHEMATIC POSITION | CONNECTION R1 POSITION A AND CONNECTION R2 POSITION B AND CONNECTION R3 POSITION C AND CONNECTION S1 POSITION H AND CONNECTION S2 POSITION E AND CONNECTION S3 POSITION J AND CONNECTION S4 POSITION F |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 7 TURRET |
| TRANSFORMATION RATIO | 1.000 STATOR TO ROTOR NOMINAL |
| UNDERCUT DIAMETER | 0.6910 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| ZRO RESISTANCE IN OHMS | 143.00 NOMINAL |
| ZSS RESISTANCE IN OHMS | 209.00 NOMINAL |