| STATOR INPUT VOLTAGE RATING IN VOLTS | 11.8 NOMINAL |
| STATOR INPUT CURRENT RATING | 30.0 MILLIAMPERES NOMINAL |
| STATOR INPUT ELECTRICAL POWER RATING | 73.0 MILLIWATTS NOMINAL |
| TERMINAL TYPE AND QUANTITY | 5 TURRET |
| BODY STYLE | STANDARD ROUND A |
| BODY MATERIAL | ALUMINUM OR |
| STEEL CORROSION RESISTING |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| BODY SIZE | 8 |
| ZRO RESISTANCE IN OHMS | 470.00 NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 1770.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 81.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 330.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 365.00 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 64.00 NOMINAL |
| TRANSFORMATION RATIO | 2.203 ROTOR TO STATOR NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 8.200 INPUT TO OUTPUT NOMINAL |
| MAXIMUM TEMP RISE | 12.0 DEG CELSIUS |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 25.00 OUTPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 9.0 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.0 CENTIMETER-GRAMS NOMINAL |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND |
| 0.5000 INCHES MAXIMUM |
| OVERALL LENGTH | 2.1400 INCHES MAXIMUM |
| FLANGE DIAMETER | 0.7470 INCHES MINIMUM AND |
| 0.7500 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0590 INCHES MINIMUM AND |
| 0.0650 INCHES MAXIMUM |
| UNDERCUT DIAMETER | 0.6880 INCHES MINIMUM AND |
| 0.6910 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0590 INCHES MINIMUM AND |
| 0.0650 INCHES MAXIMUM |
| PILOT LENGTH | 0.0370 INCHES MINIMUM AND |
| 0.0430 INCHES MAXIMUM |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.3680 INCHES MAXIMUM |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHAFT DIAMETER | 0.0895 INCHES MINIMUM AND |
| 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.5530 INCHES NOMINAL AND |
| 0.5770 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0250 INCHES MINIMUM AND |
| 0.0350 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0200 INCHES NOMINAL AND |
| 0.0300 INCHES MAXIMUM SINGLE SHAFT |
| TERMINAL LOCATION | REAR |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 05088 |
| DESIGN CONTROL REFERENCE | CM91004038 |