| ADJUSTMENT DEVICE TYPE AND QUANTITY | 1 SHAFT |
| APPLICATION DESIGN | AUDIO |
| ATTENUATION VARIATION METHOD | STEPPED |
| ATTENUATION PER STEP IN DECIBELS | 3.0 |
| BODY DIAMETER | 1.750 INCHES NOMINAL |
| BODY LENGTH | 2.062 INCHES NOMINAL |
| BODY STYLE | CYLINDRICAL W/SIDE TERMINALS |
| DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 1.250 INCHES NOMINAL |
| FREQUENCY RANGE | 20.000 KILOHERTZ MINIMUM AND 200.000 KILOHERTZ MAXIMUM |
| IMPEDANCE RATING IN OHMS | 600.0 INPUT-OUTPUT |
| INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS | 0.1 |
| OVERALL ATTENUATION ACCURACY IN DECIBELS | -0.30 TO 0.30 |
| OVERALL ATTENUATION RANGE IN DECIBELS | +0.0 TO 60.0 |
| OVERALL LENGTH | 3.000 INCHES NOMINAL |
| OVERALL WIDTH | 2.125 INCHES NOMINAL |
| MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | 0.138 INCHES |
| MOUNTING FACILITY PATTERN | TWO POSITION IN-LINE |
| MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| MOUNTING THREAD QUANTITY | 32 PER INCH |
| OPERATING TEMP RANGE | -10.0 TO 65.0 CELSIUS |
| POWER RATING | 750.0 MILLIWATTS AVERAGE |
| PRECIOUS MATERIAL AND LOCATION | CONTACTS SILVER |
| PRECIOUS MATERIAL | SILVER |
| SCHEMATIC DIAGRAM DESIGNATOR | "T" |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| SHAFT TYPE | ROUND |
| SHAFT LENGTH | 0.938 INCHES NOMINAL |
| STEP POSITION QUANTITY | 20 |
| VOLTAGE STANDING WAVE RATIO | 1.10 |
| TERMINAL TYPE AND QUANTITY | 6 TAB, SOLDER LUG |
| TEST DATA DOCUMENT | 61967-82340 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |