|
|
|
National Stock Number:
5985-00-473-8211
Federal Supply Class:
5985
National Item Identification Number:
004738211
Description:
ATTENUATOR,VARIABLE
Detail:
A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).
|
Manufacturer Information:
| 9747371-3 | 01714 | LUCENT TECHNOLOGIES INC ADVANCED TECHNOLOGY SYSTEMS | | 9747371-3 | 06KW9 | LUCENT TECHNOLOGIES INC DBA FEDERAL MARKETING GROUP | | AV-10N | 00929 | MICROLAB/FXR LLC | | 9747371-3 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 9747371-3 | 3B4M0 | LUCENT TECHNOLOGIES INC CORPORATE HEADQUARTERS | | 9747371-3 | 64959 | AMERICAN TELEPHONE AND TELEGRAPH CO |
|
Techincal Specification:
| ADJUSTMENT DEVICE TYPE AND QUANTITY | 1 LEVER | | APPLICATION DESIGN | TRANSMISSION LINE | | ATTENUATION PER STEP IN DECIBELS | 1.0 | | ATTENUATION VARIATION METHOD | STEPPED | | BODY STYLE | COAXIAL TYPE | | COAXIAL CONNECTOR SERIES DESIGNATION | N | | FREQUENCY RANGE | 0.000 HERTZ MINIMUM AND 2.000 MEGAHERTZ MAXIMUM | | IMPEDANCE RATING IN OHMS | 50.0 INPUT-OUTPUT | | OVERALL ATTENUATION RANGE IN DECIBELS | +0.0 TO 5.0 | | OVERALL LENGTH | 2.750 INCHES NOMINAL | | OVERALL WIDTH | 1.125 INCHES NOMINAL | | MOUNTING FACILITY TYPE AND QUANTITY | 2 TERMINAL | | POWER RATING | 2.0 WATTS AVERAGE | | STEP POSITION QUANTITY | 5 | | TERMINAL TYPE AND QUANTITY | 1 CONNECTOR, COAXIAL, MALE AND 1 CONNECTOR, COAXIAL, FEMALE | | TEST DATA DOCUMENT | 18876-9747371-3 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|