| ADJUSTMENT DEVICE TYPE AND QUANTITY | 1 SHAFT AND 1 KNOB |
| APPLICATION DESIGN | TRANSMISSION LINE |
| ATTENUATION VARIATION METHOD | CONTINUOUS |
| BODY STYLE | COAXIAL TYPE |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 3.800 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 3.800 INCHES MAXIMUM |
| COAXIAL CONNECTOR SERIES DESIGNATION | N |
| FREQUENCY RANGE | 2.000 GIGAHERTZ MINIMUM AND 4.000 GIGAHERTZ MAXIMUM |
| IMPEDANCE RATING IN OHMS | 50.0 INPUT-OUTPUT |
| INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS | 6.0 |
| MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | 0.164 INCHES |
| MOUNTING FACILITY PATTERN | FOUR POSITION RECTANGULAR |
| MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| MOUNTING THREAD QUANTITY | 32 PER INCH |
| OPERATING TEMP RANGE | -10.0 TO 71.0 CELSIUS |
| OVERALL ATTENUATION ACCURACY IN DECIBELS | -1.50 TO 1.50 |
| OVERALL ATTENUATION RANGE IN DECIBELS | +0.0 TO 100.0 |
| OVERALL HEIGHT | 3.000 INCHES MAXIMUM |
| OVERALL LENGTH | 5.780 INCHES MAXIMUM |
| OVERALL WIDTH | 5.000 INCHES MAXIMUM |
| SPECIAL FEATURES | ATTENUATION ACCURACY MEASURED AT 2.0 AND 4.0 GIGAHERTZ |
| POWER RATING | 5.0 WATTS AVERAGE |
| SEGMENT ATTENUATION ACCURACY IN DECIBELS | -1.50 TO 1.50 |
| SEGMENT ATTENUATION RANGE IN DECIBELS | +0.00 TO 100.00 |
| SHAFT LENGTH | 0.620 INCHES MAXIMUM |
| SHAFT DIAMETER | 0.250 INCHES MAXIMUM |
| SHAFT TYPE | ROUND |
| TERMINAL TYPE AND QUANTITY | 2 CONNECTOR, COAXIAL, FEMALE |
| TEST DATA DOCUMENT | 97942-138C225 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| VOLTAGE STANDING WAVE RATIO | 1.50 |