| ACTUATOR OPERATING METHOD | MANUAL |
| BODY STYLE | RECTANGULAR |
| COAXIAL CONNECTOR SERIES DESIGNATION | N |
| CONNECTOR END DESIGN | FEMALE AND MALE |
| COUPLING POSITION QUANTITY | 3 |
| FREQUENCY RATING | 0.0 GIGAHERTZ MINIMUM AND 10.0 GIGAHERTZ MAXIMUM SINGLE FREQUENCY RF POWER HANDLING |
| FREQUENCY RATING | 0.0 GIGAHERTZ MINIMUM AND 10.0 GIGAHERTZ MAXIMUM SINGLE FREQUENCY VOLTAGE STANDING WAVE RATIO |
| FREQUENCY RATING | 0.0 GIGAHERTZ MINIMUM AND 10.0 GIGAHERTZ MAXIMUM SINGLE FREQUENCY CROSSTALK REFERENCE |
| FREQUENCY RATING | 0.0 GIGAHERTZ MINIMUM AND 10.0 GIGAHERTZ MAXIMUM SINGLE FREQUENCY INSERTION LOSS REFERENCE |
| FREQUENCY RATING | 0.0 GIGAHERTZ MINIMUM AND 10.0 GIGAHERTZ MAXIMUM SINGLE FREQUENCY OPERATING |
| INSERTION LOSS IN DECIBELS | 0.31 SINGLE |
| LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS | 1.187 INCHES NOMINAL SINGLE MOUNTING FACILITY PATTERN |
| LONGEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS | 1.187 INCHES NOMINAL SINGLE MOUNTING FACILITY PATTERN |
| MATERIAL | METAL BODY |
| MINIMUM CROSSTALK RATING IN DECIBELS | 50.0 SINGLE |
| MOUNTING FACILITY PATTERN | FOUR POSITION RECTANGULAR SINGLE MOUNTING FACILITY PATTERN |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| NOMINAL THREAD SIZE | 0.112 INCHES MOUNTING FACILITY HOLE |
| OPERATING TEMP RANGE | -55.0 TO 85.0 CELSIUS |
| OVERALL HEIGHT | 2.960 INCHES NOMINAL |
| OVERALL LENGTH | 3.384 INCHES NOMINAL |
| OVERALL WIDTH | 2.750 INCHES NOMINAL |
| POLE QUANTITY | 1 |
| RF MAXIMUM VOLTAGE RATING | 500.0 VOLTS RMS |
| RF POWER HANDLING CAPABILITY | 100.0 WATTS AVERAGE SINGLE |
| SWITCH OPERATION SEQUENCE | BREAKS BEFORE MAKES |
| SWITCH TYPE | NONTRANSFER |
| TERMINAL TYPE AND QUANTITY | 3 RECEPTACLE, COAXIAL |
| TEST DATA DOCUMENT | 81349-MIL-S-3928 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD CLASS | 2B MOUNTING FACILITY HOLE |
| THREAD SERIES DESIGNATOR | UNC MOUNTING FACILITY HOLE |
| THROW QUANTITY | 2 |
| VOLTAGE STANDING WAVE RATIO | 1.30 SINGLE |