| ADJUSTMENT DEVICE TYPE AND QUANTITY | 1 SHAFT |
| APPLICATION DESIGN | AUDIO |
| ATTENUATION VARIATION METHOD | CONTINUOUS |
| BODY DIAMETER | 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM |
| BODY LENGTH | 0.547 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL W/SIDE AND REAR TERMINALS |
| BUSHING LENGTH | 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| FSC APPLICATION DATA | ANTENNAS,WAVEGUIDES,AND RELATED EQUIPMENT |
| IMPEDANCE RATING IN OHMS | 135.0 INPUT-OUTPUT |
| INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS | 0.6 |
| MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | 0.250 INCHES |
| MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNEF |
| MOUNTING FACILITY TYPE AND QUANTITY | 1 THREADED BUSHING |
| MOUNTING THREAD QUANTITY | 32 PER INCH |
| OPERATING TEMP RANGE | -55.0 TO 120.0 CELSIUS |
| OVERALL ATTENUATION ACCURACY IN DECIBELS | -1.00 TO 1.00 |
| OVERALL ATTENUATION RANGE IN DECIBELS | +0.0 TO 20.0 |
| OVERALL DIAMETER | 0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM |
| OVERALL LENGTH | 1.297 INCHES MAXIMUM |
| POWER RATING | 250.0 MILLIWATTS AVERAGE |
| SCHEMATIC DIAGRAM DESIGNATOR | BRIDGED "T" |
| SHAFT LENGTH | 0.500 INCHES NOMINAL |
| SHAFT DIAMETER | 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| SHAFT TYPE | ROUND, SLOTTED |
| TERMINAL TYPE AND QUANTITY | 6 TAB, SOLDER LUG |
| TEST DATA DOCUMENT | 13499-383-0273 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |