|
|
|
National Stock Number:
5975-00-503-4694
Federal Supply Class:
5975
National Item Identification Number:
005034694
Description:
STUFFING TUBE
Detail:
An item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
|
Manufacturer Information:
| 11571000-4 ITEM | 0DHG4 | GULF COAST HOLDINGS INC DBA UNIDYNAMICS | | M19622-2-001 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M19622/2-001 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-S-19622/2 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILS19622-2 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BEND ANGLE | 90.0 DEGREES NOMINAL | | BORE DIAMETER | 0.350 INCHES NOMINAL | | DISTANCE FROM CENTER OF MOUNTING END TO EDGE OF PACKING CHAMBER END | 1.625 INCHES NOMINAL | | FIRST END CHAMFER ANGLE | 10.0 DEGREES NOMINAL | | FIRST END CHAMFER DEPTH | 0.250 INCHES NOMINAL | | FIRST PACKING CHAMBER INSIDE DIAMETER | 0.560 INCHES NOMINAL | | FIRST PACKING CHAMBER LENGTH | 0.687 INCHES NOMINAL | | ITEM ACCOMMODATED MAXIMUM THICKNESS | 0.750 INCHES | | OUTSIDE RECESS LENGTH | 0.099 INCHES NOMINAL | | OUTSIDE RECESS WIDTH | 0.156 INCHES NOMINAL | | OVERALL HEIGHT | 2.438 INCHES NOMINAL | | OVERALL OUTSIDE DIAMETER | 1.249 INCHES NOMINAL | | PACKING CHAMBER QUANTITY | 1 | | MATERIAL | PLASTIC POLYAMIDE OVERALL | | NOMINAL THREAD SIZE | 0.875 INCHES BOTH ENDS | | RADIUS | 0.350 INCHES NOMINAL | | SIZE | 0.350 INCHES NOMINAL | | SPECIAL MARKINGS | 1 | | STYLE DESIGNATOR | ANGLED-DOUBLE | | TEST DATA DOCUMENT | 81349-MIL-S-19622 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THICKNESS | 0.125 INCHES NOMINAL | | THREAD DIRECTION | RIGHT-HAND BOTH ENDS | | THREAD LENGTH | 0.719 INCHES NOMINAL FIRST END | | THREAD LENGTH | 1.062 INCHES NOMINAL BOTH ENDS | | THREAD QUANTITY PER INCH | 12 BOTH ENDS | | THREAD SERIES DESIGNATOR | UN BOTH ENDS |
|
|