|
|
|
National Stock Number:
5970-00-470-3333
Federal Supply Class:
5970
National Item Identification Number:
004703333
Description:
INSULATOR,WASHER
Detail:
An insulator that is essentially thin and flat, with one through hole centrally located. The general shape may vary by the addition of features such as beveled edges, indented surfaces, through hole keys, and/or peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. Excludes items with more than one hole. See also INSULATOR, DISK; INSULATOR, BEAD; INSULATOR, BUSHING; and INSULATOR, PLATE
|
Manufacturer Information:
| 5970PL0849119 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | AS33731 | 0U583 | SAE INTERNATIONAL | | MS3373-A2 | 0U583 | SAE INTERNATIONAL | | MS3373-A2 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | AS33731 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | MS3373-A2 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| INSIDE DIAMETER | 0.454 INCHES MINIMUM AND 0.464 INCHES MAXIMUM | | MATERIAL AND LOCATION | OVERALL PLASTIC, MIL-P-19833, TYPE GDI-30F | | OUTSIDE DIAMETER | 0.671 INCHES NOMINAL | | OVERALL HEIGHT | 0.084 INCHES MINIMUM AND 0.090 INCHES MAXIMUM | | SPECIAL FEATURES | TAB INCLUDED | | STYLE DESIGNATOR | ROUND, FLAT |
|
|