| ANGLE BETWEEN LARGE END AND SMALL END CENTERLINES IN DEG | 90.0 NOMINAL AFTER UNRESTRICTED RECOVERY |
| ANGLE BETWEEN LARGE END AND SMALL END CENTERLINES IN DEG | 180.0 NOMINAL AS SUPPLIED |
| COLOR | BLACK |
| DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS | 200.0 VOLTS PER MIL /0.001 INCH/ |
| DISTANCE FROM CENTERLINE OF SMALL END TO EDGE OF LARGE END | 0.610 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| DISTANCE FROM INTERSECTING CENTERLINES TO EDGE OF SMALL END | 0.680 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| DISTANCE FROM TOP OF SHOULDER TO SMALL END OF MAIN BODY | 0.190 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FLAME RESISTANT AND MILDEW RESISTANT AND SOLVENT RESISTANT AND WATER RESISTANT |
| FLEXIBILITY | SEMIRIGID |
| HEIGHT | 0.790 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| LARGE END WALL THICKNESS OF MAIN BODY | 0.040 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| MAIN BODY LARGE END INSIDE DIAMETER | 0.170 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| MAIN BODY LARGE END INSIDE DIAMETER | 0.700 INCHES MINIMUM AS SUPPLIED |
| MAIN BODY SMALL END INSIDE DIAMETER | 0.700 INCHES MINIMUM AS SUPPLIED |
| MATERIAL DOCUMENT AND CLASSIFICATION | RT-301, RAYCHEM CORP MFR REF SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED |
| MATERIAL | PLASTIC POLYOLEFIN LOCATION NOT OTHERWISE SPECIFIED |
| MINIMUM TENSILE STRENGTH | 1500 POUNDS PER SQUARE INCH |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| SMALL END WALL THICKNESS OF MAIN BODY | 0.040 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| SPECIAL FEATURES | 1 MOLDING PORT 0.180 IN. DIA |
| STYLE DESIGNATOR | BOOT-90 DEGREES |
| TEMP RATING | -55.0 CELSIUS |