|
|
|
National Stock Number:
5961-00-479-1454
Federal Supply Class:
5961
National Item Identification Number:
004791454
Description:
SEMICONDUCTOR DEVICE,THYRISTOR
Detail:
A bistable semiconductor device comprising three or more junctions which is normally a nonconductor until the application of a signal to a gate terminal, at which time the device switches to the conductive state. Includes devices capable of being switched back to the nonconductive state upon application of a different signal to the same or another gate terminal. May or may not include mounting hardware and/or heatsink. For solid state devices which are responsive to visible or infrared radiant energy, see SEMICONDUCTOR DEVICE, PHOTO.
|
Manufacturer Information:
| 2N4167 | 04713 | FREESCALE SEMICONDUCTOR, INC. | | 2N4169 | 04713 | FREESCALE SEMICONDUCTOR, INC. | | 353-6485-011 | 04713 | FREESCALE SEMICONDUCTOR, INC. | | 353-6485-011 | 13499 | ROCKWELL COLLINS, INC. | | DMS 87127B | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) | | 353-6485-011 | 95105 | ROCKWELL COLLINS, INC. | | SCR1834H | 04713 | FREESCALE SEMICONDUCTOR, INC. |
|
Techincal Specification:
| SEMICONDUCTOR MATERIAL | SILICON | | VOLTAGE RATING IN VOLTS PER CHARACTERISTIC | 25.0 MAXIMUM BREAKOVER VOLTAGE, DC | | CURRENT RATING PER CHARACTERISTIC | 100.00 AMPERES MAXIMUM AVERAGE FORWARD CURRENT AVERAGED OVER A FULL 60-HZ CYCLE | | POWER RATING PER CHARACTERISTIC | 5.0 WATTS MAXIMUM PEAK GATE POWER DISSIPATION | | MAXIMUM OPERATING TEMP PER MEASUREMENT POINT | 100.0 DEG CELSIUS CASE | | INCLOSURE MATERIAL | METAL | | MOUNTING METHOD | THREADED STUD | | MOUNTING FACILITY QUANTITY | 1 | | THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD SIZE | 0.190 INCHES | | TERMINAL TYPE AND QUANTITY | 1 THREADED STUD AND | | 2 TAB, SOLDER LUG | | OVERALL LENGTH | 0.400 INCHES MAXIMUM | | OVERALL WIDTH ACROSS FLATS | 0.437 INCHES MAXIMUM | | FEATURES PROVIDED | HERMETICALLY SEALED CASE | | TEST DATA DOCUMENT | 13499-353-6485 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|