| ELECTRODE INTERNALLY-ELECTRICALLY CONNECTED TO CASE | ANODEANODE |
| CURRENT RATING PER CHARACTERISTIC | 2.00 AMPERES MAXIMUM PEAK NEGATIVE GATE CURRENT AND 2.00 AMPERES MAXIMUM PEAK NEGATIVE GATE CURRENT AND 4.70 AMPERES MAXIMUM AVERAGE ON-STATE CURRENT, 180 DEGREES CONDUCTION ANGLE, AVERAGE OVER A FULL 60-HZ CYCLE AND 4.70 AMPERES MAXIMUM AVERAGE ON-STATE CURRENT, 180 DEGREES CONDUCTION ANGLE, AVERAGE OVER A FULL 60-HZ CYCLE AND 60.00 AMPERES MAXIMUM PEAK ON-STATE SURGE CURRENT60.00 AMPERES MAXIMUM PEAK ON-STATE SURGE CURRENT |
| FEATURES PROVIDED | HERMETICALLY SEALED CASEHERMETICALLY SEALED CASE |
| INTERNAL CONFIGURATION | JUNCTION CONTACTJUNCTION CONTACT |
| OVERALL LENGTH | 0.300 INCHES MINIMUM AND 0.300 INCHES MINIMUM AND 0.400 INCHES MAXIMUM0.400 INCHES MAXIMUM |
| OVERALL WIDTH ACROSS FLATS | 0.424 INCHES MINIMUM AND 0.424 INCHES MINIMUM AND 0.437 INCHES MAXIMUM0.437 INCHES MAXIMUM |
| MAXIMUM OPERATING TEMP PER MEASUREMENT POINT | 150.0 CELSIUS JUNCTION150.0 CELSIUS JUNCTION |
| MOUNTING FACILITY QUANTITY | 11 |
| MOUNTING METHOD | THREADED STUDTHREADED STUD |
| NOMINAL THREAD SIZE | 0.190 INCHES0.190 INCHES |
| POWER RATING PER CHARACTERISTIC | 5.0 WATTS MAXIMUM PEAK GATE POWER DISSIPATION5.0 WATTS MAXIMUM PEAK GATE POWER DISSIPATION |
| SEMICONDUCTOR MATERIAL | SILICONSILICON |
| SPECIAL FEATURES | MUST MEET ALL TEST REQUIREMENTS OF WESTINGHOUSE DWG 58OR299; JUNCTION PATTERN ARRANGEMENT: NPNPMUST MEET ALL TEST REQUIREMENTS OF WESTINGHOUSE DWG 58OR299; JUNCTION PATTERN ARRANGEMENT: NPNP |
| VOLTAGE RATING IN VOLTS PER CHARACTERISTIC | 75.0 MAXIMUM BREAKDOWN VOLTAGE, EMITTER-TO-BASE, COLLECTOR OPEN AND 75.0 MAXIMUM BREAKDOWN VOLTAGE, EMITTER-TO-BASE, COLLECTOR OPEN AND 10.0 MAXIMUM PEAK NEGATIVE GATE VOLTAGE AND 10.0 MAXIMUM PEAK NEGATIVE GATE VOLTAGE AND 50.0 MAXIMUM REVERSE VOLTAGE, PEAK50.0 MAXIMUM REVERSE VOLTAGE, PEAK |
| TERMINAL TYPE AND QUANTITY | 2 TAB, SOLDER LUG AND 2 TAB, SOLDER LUG AND 1 THREADED STUD1 THREADED STUD |
| TEST DATA DOCUMENT | 97942-580R299 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)97942-580R299 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| THREAD SERIES DESIGNATOR | UNFUNF |