|
|
|
National Stock Number:
5955-00-432-9418
Federal Supply Class:
5955
National Item Identification Number:
004329418
Description:
CRYSTAL UNIT,QUARTZ
Detail:
An item which consists of a quartz crystal resonator(s), suitably mounted in a HOLDER, QUARTZ CRYSTAL.
|
Manufacturer Information:
| CR15B/U80K00000 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | CR15U80-000KHZ | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-C-3098/1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILC3098 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| MODE OF OSCILLATION | FUNDAMENTAL | | EQUIVALENT RESISTANCE VALUE IN OHMS | 10000.0 NOMINAL | | CIRCUIT RESONANCE | ANTIRESONANCE | | SPECIFIED FREQUENCY | 80.000 KILOHERTZ | | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.010 TO 0.010 | | OPERATING TEMP RANGE | -40.0 TO 70.0 DEG CELSIUS | | DRIVE LEVEL RATING | 2.0 MILLIWATTS NOMINAL | | MATERIAL | PLASTIC COVER, HOLDER | | STYLE DESIGNATOR | RECTANGULAR BODY, PIN TERMINALS | | LOAD CAPACITANCE IN PICOFARADS | 32.0 NOMINAL | | OVERALL LENGTH | 2.736 INCHES MAXIMUM | | TERMINAL LENGTH | 0.672 INCHES MAXIMUM | | OVERALL HEIGHT | 1.202 INCHES MAXIMUM | | OVERALL WIDTH | 1.609 INCHES MAXIMUM | | BODY LENGTH | 2.064 INCHES MAXIMUM | | TERMINAL DIAMETER | 0.156 INCHES NOMINAL | | DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL CENTERS | 0.250 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.812 INCHES NOMINAL | | SECOND CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.500 INCHES NOMINAL | | TEST DATA DOCUMENT | 81349-MILC3098 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | SPEC/STD CONTROLLING DATA | | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | CR15B/U80K00000 | | MANUFACTURERS CODE | 81349 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-C-3098/1 |
|
|