| DUTY TYPE | CONTINUOUSCONTINUOUS |
| ARC QUENCHING METHOD | AIRAIR |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.067 INCHES NOMINAL SINGLE MOUNTING FACILITY1.067 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| COIL QUANTITY | 11 |
| CUBIC MEASURE | 0.594 CUBIC INCHES0.594 CUBIC INCHES |
| ENVIRONMENTAL PROTECTION | HERMETICHERMETIC |
| FRAGILITY FACTOR | MODERATELY RUGGEDMODERATELY RUGGED |
| MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | 300.0 MILLIAMPERES AC AND 300.0 MILLIAMPERES AC AND 2.0 AMPERES DC RESISTIVE LOAD2.0 AMPERES DC RESISTIVE LOAD |
| MAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS | 115.0 AC AND 115.0 AC AND 28.0 DC28.0 DC |
| MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | 100.0 MILLIAMPERES AC AND 100.0 MILLIAMPERES AC AND 100.0 MILLIAMPERES DC LAMP LOAD100.0 MILLIAMPERES DC LAMP LOAD |
| OVERALL HEIGHT | 1.110 INCHES MAXIMUM1.110 INCHES MAXIMUM |
| OVERALL LENGTH | 1.340 INCHES MAXIMUM1.340 INCHES MAXIMUM |
| OVERALL WIDTH | 0.400 INCHES MAXIMUM0.400 INCHES MAXIMUM |
| MOUNTING FACILITY PATTERN | IN-LINE SINGLE MOUNTING FACILITYIN-LINE SINGLE MOUNTING FACILITY |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE SINGLE MOUNTING FACILITY |
| NONPILE-UP MAIN CONTACT ARRANGEMENT | 2 POLE, DOUBLE THROW, ONE POSITION MOMENTARY2 POLE, DOUBLE THROW, ONE POSITION MOMENTARY |
| OPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP | 26.5 VOLTS DC 25 DEG CELSIUS SINGLE WINDING26.5 VOLTS DC 25 DEG CELSIUS SINGLE WINDING |
| PURPOSE FOR WHICH DESIGNED | GENERALGENERAL |
| SPECIFICATION/STANDARD DATA | 81349-MIL-R-5757/10 GOVERNMENT SPECIFICATION81349-MIL-R-5757/10 GOVERNMENT SPECIFICATION |
| WINDING DC RESISTANCE RATING | 540.0 OHMS MINIMUM AND 540.0 OHMS MINIMUM AND 770.0 OHMS MAXIMUM SINGLE WINDING770.0 OHMS MAXIMUM SINGLE WINDING |
| WINDING QUANTITY | 11 |
| STORAGE TYPE | GENERAL PURPOSE WAREHOUSEGENERAL PURPOSE WAREHOUSE |
| TERMINAL TYPE AND QUANTITY | 8 WIRE HOOK ALL FUNCTIONS8 WIRE HOOK ALL FUNCTIONS |
| TEST DATA DOCUMENT | 81349-MIL-R-5757 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).81349-MIL-R-5757 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| TIME DELAY | 0.006 SECONDS MAXIMUM FIXED OPERATE AND RELEASE TIME0.006 SECONDS MAXIMUM FIXED OPERATE AND RELEASE TIME |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.120 INCHES NOMINAL SINGLE MOUNTING FACILITY0.120 INCHES NOMINAL SINGLE MOUNTING FACILITY |