|
|
|
National Stock Number:
5940-00-518-9610
Federal Supply Class:
5940
National Item Identification Number:
005189610
Description:
TERMINAL BOARD
Detail:
An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (as modified); CONNECTOR (as modified). Excludes TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; and CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. For items having printed electrical conductor paths, see PRINTED WIRING BOARD.
|
Manufacturer Information:
| 1533352 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 15B57-2 | 03956 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 564101-37 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 5TB12 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | 9000S6505-73214REVGPC37 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | A2133120-3ISSUEA | 28528 | ITT INDUSTRIES INC ITT AEROSPACE COMMUNICATIONS DIV EAST | | A2133120-3ISSUEB | 28528 | ITT INDUSTRIES INC ITT AEROSPACE COMMUNICATIONS DIV EAST | | A2133120-3ISSUEB | 31550 | L3HARRIS TECHNOLOGIES, INC. | | LD613709 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | MIL-T-55164/11 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | NGX19348-9 | 80020 | NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION CODE 4.8.8.0.0.B BLDG 148-2 |
|
Techincal Specification:
| DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.250 INCHES | | BASE THICKNESS | 0.625 INCHES | | BOARD CONSTRUCTION | SOLID CONSTRUCTION | | BOARD HEIGHT EXCLUDING TERMINALS | 1.375 INCHES | | BOARD OVERALL HEIGHT | 1.375 INCHES | | BOARD OVERALL LENGTH | 8.500 INCHES | | BOARD OVERALL WIDTH | 1.062 INCHES | | BODY STYLE | BARRIER TYPE | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 8.000 INCHES | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.594 INCHES | | DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.531 INCHES | | FEEDTHRU CONNECTION END TYPE | 598 BOTH ENDS SINGLE COMBINATION | | FEEDTHRU TERMINAL QUANTITY | 12 SINGLE COMBINATION | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14,TYPE MAI-60 MIL SPEC SINGLE MATERIAL RESPONSE BOARD | | MATERIAL | PLASTIC POLYESTER AND GLASS FIBER BOARD | | MOUNTING FACILITY TYPE AND QUANTITY | 2 SLOT | | MOUNTING SLOT LENGTH | 0.281 INCHES | | MOUNTING SLOT WIDTH | 0.219 INCHES | | SPECIAL MARKINGS | 1,2,3,4,5,6,7,8,9,10,11,12 | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-N-290,CLASS 1,TYPE 7 FED SPEC SINGLE TREATMENT RESPONSE TERMINALS | | SURFACE TREATMENT | NICKEL TERMINALS | | TERMINAL DESIGN | LATERAL FEEDTHRU | | TERMINAL PATTERN ARRANGEMENT | SINGLE ROW | | TERMINAL ROW QUANTITY | 1 |
|
|