|
|
|
National Stock Number:
5940-00-518-2920
Federal Supply Class:
5940
National Item Identification Number:
005182920
Description:
TERMINAL BOARD
Detail:
An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (as modified); CONNECTOR (as modified). Excludes TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; and CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. For items having printed electrical conductor paths, see PRINTED WIRING BOARD.
|
Manufacturer Information:
| 0370-5 | 56232 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.125 INCHES | | BASE THICKNESS | 0.219 INCHES | | BOARD CONSTRUCTION | HOLLOW CONSTRUCTION WITHOUT INSULATED STRIP | | BOARD HEIGHT EXCLUDING TERMINALS | 0.312 INCHES | | BOARD OVERALL HEIGHT | 0.312 INCHES | | BOARD OVERALL LENGTH | 1.750 INCHES | | BOARD OVERALL WIDTH | 0.625 INCHES | | BODY STYLE | BARRIER TYPE | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.500 INCHES | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.250 INCHES | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.250 INCHES | | CURRENT RATING IN AMPS | 5.0 | | DIELECTRIC WITHSTANDING VOLTAGE IN VOLTS | 1000.0 | | DISTANCE BETWEEN TERMINAL ROW CENTERS | 0.250 INCHES | | DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.188 INCHES | | MATERIAL | COPPER ALLOY 210 TERMINALS | | MATERIAL | PLASTIC BOARD | | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE | | MOUNTING HOLE DIAMETER | 0.125 INCHES | | NONFEEDTHRU TERMINAL QUANTITY | 5 SINGLE | | NONFEEDTHRU TERMINAL TYPE | 859 SINGLE | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY MIL-Q-21549B-SP24-1 | | SURFACE TREATMENT | NICKEL ALLOY TERMINALS | | TERMINAL CONNECTING LINK QUANTITY | 5 SINGLE | | TERMINAL CONNECTING LINK TYPE | 1 SINGLE | | TERMINAL DESIGN | LINKED NONFEEDTHRU | | TERMINAL PATTERN ARRANGEMENT | MULTI-ROW | | TERMINAL ROW QUANTITY | 2 |
|
|