|
|
|
National Stock Number:
5940-00-500-5390
Federal Supply Class:
5940
National Item Identification Number:
005005390
Description:
TERMINAL BOARD
Detail:
An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (as modified); CONNECTOR (as modified). Excludes TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; and CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. For items having printed electrical conductor paths, see PRINTED WIRING BOARD.
|
Manufacturer Information:
| 10658261 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 1601755 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 564101PC75 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 1622-01 | 28003 | WINCHESTER INDUSTRIES INC | | 482-7067865-72 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 5940PL0835682 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 9000-S6501-7321 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | 9TB04F | 26405 | REGAL BELOIT AMERICA, INC | | 9000-S6501-74210PC9 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 9000S6505-73214PC75 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 9000S6505B73214J | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 9TB4 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | 73214-75 | 88223 | WICKES MFG CO ELECTRICAL DIV | | 5940PL1852980 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | LD297886ITEM27 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | A-A-59125/15 | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | AA59125/15-9TB4 | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | NGX19348-27 | 80020 | NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION CODE 4.8.8.0.0.B BLDG 148-2 | | M55164/15TY9TB4 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-T-55164/15 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILT16784 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | 9TB4 | 83330 | DIALIGHT CORPORATION | | 9TB4 | 86796 | ROFLAN ASSOCIATES INC | | H689-1703-72 | 96169 | ELECTRIC BOAT CORPORATION |
|
Techincal Specification:
| DIELECTRIC WITHSTANDING VOLTAGE IN VOLTS | 1.5 | | DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.312 INCHES | | DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.739 INCHES | | BASE THICKNESS | 0.312 INCHES | | BOARD CONSTRUCTION | HOLLOW CONSTRUCTION WITHOUT INSULATED STRIP | | BOARD HEIGHT EXCLUDING TERMINALS | 0.500 INCHES | | BOARD OVERALL HEIGHT | 0.688 INCHES | | BOARD OVERALL LENGTH | 2.366 INCHES | | BOARD OVERALL WIDTH | 0.625 INCHES | | BODY STYLE | BARRIER TYPE | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.640 INCHES | | CURRENT RATING IN AMPS | 35.0 | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14,TYPE MAI-60 MIL SPEC SINGLE MATERIAL RESPONSE BOARD | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B728,CLASS B FED SPEC SINGLE MATERIAL RESPONSE TERMINALS | | MATERIAL | COPPER ALLOY 670 TERMINALS | | MATERIAL | PLASTIC POLYESTER BOARD AND GLASS FIBER BOARD | | PROPRIETARY CHARACTERISTICS | PACS | | MOUNTING FACILITY TYPE AND QUANTITY | 1 UNTHREADED HOLE | | MOUNTING HOLE DIAMETER | 0.386 INCHES | | NONFEEDTHRU TERMINAL QUANTITY | 4 SINGLE | | NONFEEDTHRU TERMINAL TYPE | 600 SINGLE | | SPECIAL MARKINGS | 1 THRU 4 | | TERMINAL DESIGN | NONFEEDTHRU | | TERMINAL PATTERN ARRANGEMENT | SINGLE ROW | | TERMINAL ROW QUANTITY | 1 |
|
|