|
|
|
National Stock Number:
5940-00-466-2119
Federal Supply Class:
5940
National Item Identification Number:
004662119
Description:
TERMINAL BOARD
Detail:
An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (as modified); CONNECTOR (as modified). Excludes TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; and CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. For items having printed electrical conductor paths, see PRINTED WIRING BOARD.
|
Manufacturer Information:
| 1853256 | 03956 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.250 INCHES | | BOARD CONSTRUCTION | SOLID CONSTRUCTION | | BOARD OVERALL LENGTH | 3.500 INCHES | | BOARD OVERALL WIDTH | 3.500 INCHES | | BOARD THICKNESS | 0.094 INCHES | | BODY STYLE | STRIP TYPE | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 3.000 INCHES | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 2.494 INCHES | | DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.625 INCHES | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-15037,TYPE GMG /D/ MIL SPEC SINGLE MATERIAL RESPONSE BOARD | | MATERIAL | PLASTIC MELAMINE AND GLASS BOARD | | MOUNTING HOLE DIAMETER | 0.166 INCHES | | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE | | NONFEEDTHRU TERMINAL QUANTITY | 38 SINGLE | | NONFEEDTHRU TERMINAL TYPE | 441 SINGLE | | SPECIAL MARKINGS | A1,CR19,CR20,CR3 THRU CR9,C2 THRU C4,Q1 THRU Q3,R11 THRU R17,R2 THRUR4,R7 THRU R9,1 THRU 4,6 THRU 8,11 THRU 41 | | TERMINAL DESIGN | NONFEEDTHRU | | TERMINAL PATTERN ARRANGEMENT | RANDOM |
|
|