|
|
|
National Stock Number:
5940-00-028-8004
Federal Supply Class:
5940
National Item Identification Number:
000288004
Description:
TERMINAL BOARD
Detail:
An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (as modified); CONNECTOR (as modified). Excludes TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; and CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. For items having printed electrical conductor paths, see PRINTED WIRING BOARD.
|
Manufacturer Information:
| AS27212 | 0U583 | SAE INTERNATIONAL | | AS27212 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | MS27212-2-6 | 0U583 | SAE INTERNATIONAL | | MS27212-2-6 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | MS27212-2-6 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BODY STYLE | BARRIER STANDOFF | | BOARD CONSTRUCTION | HOLLOW CONSTRUCTION WITHOUT INSULATED STRIP | | MOUNTING FACILITY TYPE AND QUANTITY | 7 UNTHREADED HOLE | | MATERIAL | PLASTIC DIALLYL PHTHALATE AND | | GLASS FIBER BOARD | | STEEL COMP 303 TERMINALS | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-19833 MIL SPEC ALL MATERIAL RESPONSES BOARD | | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE TERMINALS | | BOARD OVERALL LENGTH | 4.936 INCHES | | BOARD OVERALL WIDTH | 0.938 INCHES | | BOARD OVERALL HEIGHT | 1.079 INCHES | | BOARD HEIGHT EXCLUDING TERMINALS | 0.789 INCHES | | BASE THICKNESS | 0.328 INCHES | | TERMINAL PATTERN ARRANGEMENT | SINGLE ROW | | TERMINAL ROW QUANTITY | 1 | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.750 INCHES | | TERMINAL DESIGN | NONFEEDTHRU | | NONFEEDTHRU TERMINAL TYPE | 597 SINGLE | | NONFEEDTHRU TERMINAL QUANTITY | 6 SINGLE | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 0.750 INCHES | | DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.469 INCHES | | DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.218 INCHES | | MOUNTING HOLE DIAMETER | 0.115 INCHES |
|
|