5935-00-578-2759, CONNECTOR,RECEPTACLE,ELECTRICAL

National Stock Number:
5935-00-578-2759

Federal Supply Class:
5935

National Item Identification Number:
005782759

Description:
CONNECTOR,RECEPTACLE,ELECTRICAL

Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.

Manufacturer Information:

9S5427LSYM746	80064	NAVAL SHIP SYSTEMS COMMAND
9S5427LSYMB0L746	80064	NAVAL SHIP SYSTEMS COMMAND
M2726-42-001	80064	NAVAL SHIP SYSTEMS COMMAND
M2726-42-001	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
M2726/42-001	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-DTL-2726/42	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MILR2726-42	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

BODY STYLE	WALL TYPE W/ OR W/O COVER
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH	7.860 INCHES MINIMUM AND 7.890 INCHES MAXIMUM
CONNECTOR CABLE STRAIN RELIEF METHOD	CABLE CLAMP
CONNECTOR LOCKING METHOD	EXTERNALLY THREADED SHELL
CONTACT MATERIAL	COPPER ALLOY SINGLE MATING END ALL CONTACT GROUPINGS
CONTACT POSITION ARRANGEMENT STYLE	24-2008-5 SINGLE MATING END
CONTACT REMOVABILITY	REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS	500.0 SINGLE MATING END ALL CONTACT GROUPINGS
CONTACT MAXIMUM CURRENT RATING IN AMPS	60.0 SINGLE MATING END ALL CONTACT GROUPINGS
CONTACT SURFACE TREATMENT	GOLD SINGLE MATING END ALL CONTACT GROUPINGS
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	7.235 INCHES MINIMUM AND 7.265 INCHES MAXIMUM
ENVIRONMENTAL PROTECTION	MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT
INCLUDED CONTACT TYPE	ROUND SOCKET SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT QUANTITY	1 SINGLE MATING END 1ST CONTACT GROUPING
INCLUDED CONTACT QUANTITY	3 SINGLE MATING END 2ND CONTACT GROUPING
INSERT MATERIAL	PLASTIC DIALLYL PHTHALATE SINGLE MATING END
INSERT POSITION IN DEG	0.0
OVERALL HEIGHT	6.985 INCHES MINIMUM AND 7.015 INCHES MAXIMUM
OVERALL LENGTH	7.985 INCHES MINIMUM AND 8.015 INCHES MAXIMUM
OVERALL WIDTH	10.985 INCHES MINIMUM AND 11.015 INCHES MAXIMUM
MATING END QUANTITY	1
NOMINAL THREAD SIZE	4.875 INCHES
POLARIZATION METHOD	KEYWAY OR MULTIPLE KEYWAY
SHELL MATERIAL	COPPER ALLOY
SHELL TYPE	HOOD, TOP OPENING
TERMINAL LOCATION	BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE	CRIMP SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT	81349-MILR2726 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD QUANTITY PER INCH	7
THREAD SERIES DESIGNATOR	UNS
THREADED DEVICE TYPE	COUPLING FACILITY

Click here to Register for Free 30-day Trial