|
|
|
National Stock Number:
5935-00-577-8677
Federal Supply Class:
5935
National Item Identification Number:
005778677
Description:
CONNECTOR,PLUG,ELECTRICAL
Detail:
An electrical fitting with electrical contacts, constructed to be affixed to the end of a cable, conduit, coaxial line, cord or wiring for convenience in joining with other electrical connector(s) or PRINTED WIRING BOARD and is not designed to be mounted on a bulkhead, chasses, panel, PRINTED WIRING BOARD, or the like. Excludes JACK, TELEPHONE; JACK, TIP; PLUG, TELEPHONE; PLUG TIP; INSERT, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified); and SOCKET, PLUG-IN, ELECTRONIC COMPONENTS. See also LEAD ASSEMBLY, ELECTRICAL; WIRING HARNESS (as modified); and CABLE ASSEMBLY (as modified). For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 164-28-1000 | 02660 | AMPHENOL CORP SPECTRA-STRIP/ITD | | 2Z7250-161 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR | | SC-D-22580 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR | | SC-DL-34036 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR | | MIL-C-10544 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-DTL-10544 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | U-161/U | 50738 | WIRE-PRO, INC DBA WPI-SALEM DIVISION | | U-161/U | 80058 | JOINT ELECTRONICS TYPE DESIGNATION SYSTEM |
|
Techincal Specification:
| BODY STYLE | STRAIGHT SHAPE, INTERNAL COUPLING W/BACKSHELL | | CONNECTOR CABLE STRAIN RELIEF METHOD | COMPRESSION NUT | | CONNECTOR LOCKING METHOD | BAYONET PIN | | CONTACT POSITION ARRANGEMENT STYLE | 3 SINGLE MATING END | | CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 500.0 SINGLE MATING END ALL CONTACT GROUPINGS | | CONTACT MAXIMUM CURRENT RATING IN AMPS | 1.0 SINGLE MATING END ALL CONTACT GROUPINGS | | ENVIRONMENTAL PROTECTION | PRESSURE PROOF AND WATERTIGHT | | INCLUDED CONTACT TYPE | FLAT PIN SINGLE MATING END 2ND CONTACT GROUPING | | INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END 1ST CONTACT GROUPING | | INCLUDED CONTACT QUANTITY | 3 SINGLE MATING END 1ST CONTACT GROUPING | | INCLUDED CONTACT QUANTITY | 7 SINGLE MATING END 2ND CONTACT GROUPING | | INSERT MATERIAL | PLASTIC SINGLE MATING END | | INSERT POSITION IN DEG | 0.0 | | OVERALL DIAMETER | 1.281 INCHES NOMINAL | | OVERALL LENGTH | 2.062 INCHES NOMINAL | | MATING END QUANTITY | 1 | | POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY | | SHELL MATERIAL | ALUMINUM ALLOY | | SHELL SURFACE TREATMENT | ANODIZE | | SHELL TYPE | SOLID | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-10544 GOVERNMENT SPECIFICATION | | TERMINAL LOCATION | BACK SINGLE MATING END ALL CONTACT GROUPINGS | | TERMINAL TYPE | SOLDER WELL SINGLE MATING END ALL CONTACT GROUPINGS | | TEST DATA DOCUMENT | 81349-MIL-C-10544 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|