|
|
|
National Stock Number:
5935-00-570-5800
Federal Supply Class:
5935
National Item Identification Number:
005705800
Description:
CONNECTOR,PLUG,ELECTRICAL
Detail:
An electrical fitting with electrical contacts, constructed to be affixed to the end of a cable, conduit, coaxial line, cord or wiring for convenience in joining with other electrical connector(s) or PRINTED WIRING BOARD and is not designed to be mounted on a bulkhead, chasses, panel, PRINTED WIRING BOARD, or the like. Excludes JACK, TELEPHONE; JACK, TIP; PLUG, TELEPHONE; PLUG TIP; INSERT, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified); and SOCKET, PLUG-IN, ELECTRONIC COMPONENTS. See also LEAD ASSEMBLY, ELECTRICAL; WIRING HARNESS (as modified); and CABLE ASSEMBLY (as modified). For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| MILC005015 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS3408D-44-52S | 0U583 | SAE INTERNATIONAL | | MS3408D44-52S | 0U583 | SAE INTERNATIONAL | | SAE-AS50151 | 0U583 | SAE INTERNATIONAL | | MS3408D44-52S | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| 0.664 INCHES | | CONNECTOR CABLE STRAIN RELIEF METHOD | CABLE CLAMP | | CABLE ENTRANCE DIAMETER | 1.750 INCHES MAXIMUM | | SHELL TYPE | SOLID | | SHELL MATERIAL | ALUMINUM ALLOY | | SHELL SURFACE TREATMENT | CADMIUM | | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE | | POLARIZATION METHOD | KEY, MULTIPLE KEY GROOVE | | INSERT POSITION IN DEG | 0.0 | | INSERT MATERIAL | PLASTIC SILICONE MINERAL FILLED SINGLE MATING END | | CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 500.0 SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS | 700.0 SINGLE MATING END SINGLE CONTACT GROUPING | | ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND | | VIBRATION RESISTANT AND | | SALT WATER RESISTANT | | TEST DATA DOCUMENT | 81349-MIL-C-5015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-5015 GOVERNMENT SPECIFICATION | | MATING END QUANTITY | 1 | | CONTACT POSITION ARRANGEMENT STYLE | 44-52 SINGLE MATING END | | INCLUDED CONTACT QUANTITY | 104 SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT TYPE | ROUND SOCKET SINGLE MATING END SINGLE CONTACT GROUPING | | TERMINAL TYPE | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING | | TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING | | BODY STYLE | ANGLE SHAPE W/CABLE CLAMP | | OVERALL DIAMETER | 2.969 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE TO CONNECTOR END | 3.635 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE TO CABLE END | 2.234 INCHES MINIMUM AND | | 2.358 INCHES MAXIMUM | | BODY ANGLE IN DEG | 90.0 | | CONNECTOR LOCKING METHOD | INTERNALLY THREADED COUPLING RING | | THREADED DEVICE TYPE | COUPLING FACILITY | | THREAD SERIES DESIGNATOR | UN | | NOMINAL THREAD SIZE | 0.750 INCHES | | THREAD CLASS | 2B | | THREAD QUANTITY PER INCH | 16 | | THREAD DIRECTION | RIGHT-HAND | | NOMINAL THREAD LENGTH | 0.602 INCHES AND |
|
|