5935-00-521-2485, CONNECTOR,RECEPTACLE,ELECTRICAL

5935-00-521-2484 CONNECTOR,RECEPTACLE,ELECTRICAL

5935-00-521-2486 CONNECTOR,RECEPTACLE,ELECTRICAL

National Stock Number:
5935-00-521-2485

Federal Supply Class:
5935

National Item Identification Number:
005212485

Description:
CONNECTOR,RECEPTACLE,ELECTRICAL

Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.

Manufacturer Information:

M21097/21-106	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-DTL-21097/21	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MILC21097-21	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

BOARD ACCOMMODATED LENGTH	2.498 INCHES MINIMUM AND 2.510 INCHES MAXIMUM
BOARD ACCOMMODATED WIDTH	0.054 INCHES MINIMUM AND 0.071 INCHES MAXIMUM
BODY STYLE	STRAIGHT EDGE TYPE W/MOUNTING FLANGE
CONTACT MATERIAL	COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE	2 ROWS OF INDEPENDENT CONTACTS INSERTED BOARD SINGLE MATING END
CONTACT REMOVABILITY	NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT	GOLD SINGLE MATING END SINGLE CONTACT GROUPING
DISTANCE BETWEEN MOUNTING FACILITY CENTERS	2.930 INCHES MINIMUM AND 2.946 INCHES MAXIMUM
ENVIRONMENTAL PROTECTION	HUMIDITY RESISTANT AND SALT WATER RESISTANT AND SHOCK RESISTANT
INCLUDED CONTACT QUANTITY	30 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE	LEAF SPRING SINGLE MATING END SINGLE CONTACT GROUPING
INSERT MATERIAL DOCUMENT AND CLASSIFICATION	MIL-M-14 TY SDG-F MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-P-19833 TY GDI-30 MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END
INSERT MATERIAL	PLASTIC DIALLYL PHTHALATE SINGLE MATING END
OVERALL HEIGHT	0.890 INCHES NOMINAL
OVERALL LENGTH	3.406 INCHES MAXIMUM
OVERALL WIDTH	0.333 INCHES MINIMUM AND 0.353 INCHES MAXIMUM
MATING END QUANTITY	1
PRECIOUS MATERIAL AND LOCATION	CONTACT SURFACES GOLD
PRECIOUS MATERIAL	GOLD
PRECIOUS MATERIAL AND WEIGHT	0.030 GOLD GRAINS, TROY
SPECIFICATION/STANDARD DATA	81349-MIL-C-21097/21 GOVERNMENT SPECIFICATION
TERMINAL LOCATION	BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE	PIN SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT	81349-MIL-C-21097 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
UNTHREADED MOUNTING HOLE DIAMETER	0.113 INCHES MINIMUM AND 0.119 INCHES MAXIMUM

Click here to Register for Free 30-day Trial